kazazza
Member
Registered: 5th Oct 09
Location: Herne Bay, Kent
User status: Offline
|
Ive just got a universal remote central locking kit which is meant to be added to my existing central locking, but i'm having some trouble wiring it up. Here are the instructions ive got:
http://img98.imageshack.us/img98/4110/instructionsp.jpg
This pic is of the plug that plugs into the central locking motor (on the drivers side)
http://img200.imageshack.us/img200/1382/plugwires.jpg
The colour of the wires are: black and yellow, red and black, brown and white, red and brown, and brown.
My questions are:
1, Is this where I should be wiring the kit to?
2, Which wires are the 'up,' 'down,' and 'commonline'?
3, Where would be the best place to power it?
4, Where can I wire the light flash output?
5, Where is the wire for the boot so I can make that unlock as well?
Any answers much appreciated!
|
kazazza
Member
Registered: 5th Oct 09
Location: Herne Bay, Kent
User status: Offline
|
No one got any ideas?
|
dafs
Member
Registered: 15th Jan 09
Location: Bryngwran, Isle of Anglesey
User status: Offline
|
i'm currently lookin at this off my phone. So i'll go on the lap top later and have a look properly and reply :-)
|
Corsa-crAnk
Member
Registered: 18th Aug 09
User status: Offline
|
Hey, Does your alarm ask you if yr car is a positive or negative trigger?
|
kazazza
Member
Registered: 5th Oct 09
Location: Herne Bay, Kent
User status: Offline
|
I dont have an alarm. Just wasted the last hour trying different ways of wiring it up... No luck whatsoever...
|
Corsa-crAnk
Member
Registered: 18th Aug 09
User status: Offline
|
bad luck man, tbh I have a remote central locking but mine has an alarm, thats wt i meant... soz
|
dafs
Member
Registered: 15th Jan 09
Location: Bryngwran, Isle of Anglesey
User status: Offline
|
1. is the plug has come out of a box behind the ecu in the drivers outter footwell then yes
2.to do this and the next point u will need a multimeter
3.1 of these wires shoud b a positive so tap it into that
4.i've never done this sorry so i'm not sure
5. dont understand this 1 sorry. do u mean 2 open boot or unlock it ?
hope this helps 2 start wiv 
|
Nath--91CCC
Member
Registered: 9th Jan 09
Location: North Wales
User status: Offline
|
remote central locking ! what a pain ! mines just packed in! got delocked handles onit aswell! been goin thru the boot fora bit over a week!!
|
AlunJ
Member
Registered: 3rd Apr 07
Location: Newport
User status: Offline
|
In the right hand footwell drivers kickpanel, theres a ecu for the whole central locking system, if I recall the word kiekert or something german was written on it, I wired mine up to this. Tried to find the wiring scheme that I did but I must have thrown it away sorry. It's a bit hit and miss though, took me a bit of time to get it right, but when you get it working it's worth the hassle.
[Edited on 25-10-2009 by AlunJ]
|
kazazza
Member
Registered: 5th Oct 09
Location: Herne Bay, Kent
User status: Offline
|
Ive kind of got this half working now, when I lock the car it locks, then unlocks straight away. Think this might be because ive not wired up the boot yet.
Does anyone know where/what colour the wire is to unlock the boot?
|
dafs
Member
Registered: 15th Jan 09
Location: Bryngwran, Isle of Anglesey
User status: Offline
|
the boot should unlock wiv the rest of the car
|
AlunJ
Member
Registered: 3rd Apr 07
Location: Newport
User status: Offline
|
quote:
Originally posted by kazazza
Ive kind of got this half working now, when I lock the car it locks, then unlocks straight away. Think this might be because ive not wired up the boot yet.
That's a common problem, usually involves switching two wires around iirc it's the lock/unlock wires
[Edited on 26-10-2009 by AlunJ]
|
