haydenover
Member
Registered: 17th Jul 07
Location: Portsmouth
User status: Offline
|
hi ive got some fogs to wire up but i wat to use the orginal front fog switch the swich has got numbers on it
1 live?
2 live?
3 earth i know this one cause switch lights up
4 side lights?
5 sidelights? circuit
Any ideas lads and ladies?
any help would be greatful thank you
|
pow
Premium Member
Registered: 11th Sep 06
Location: Hazlemere, Buckinghamshire
User status: Offline
|
Haynes manual will have the details.
|
haydenover
Member
Registered: 17th Jul 07
Location: Portsmouth
User status: Offline
|
cool i have had a look mate but the problem i got is the kit has 3 wires one be earth one being live and one being side lights or swich live just wondering what pins to connect these wires to many thanks hayden
|
ad-sport
Member
Registered: 16th May 07
User status: Offline
|
make sure you fuse it and use a relay otherwise you could end up on fire
|
joey736
Member
Registered: 11th Mar 07
Location: hexham, near newcastle drives: Aurora XE
User status: Offline
|
ive got to do this tomorrow, will post up when i figure it out
|
fuju64
Member
Registered: 17th Aug 06
Location: Bristol
User status: Offline
|
joey you should take loads of pics and put it in the tutorials when you do
|
joey736
Member
Registered: 11th Mar 07
Location: hexham, near newcastle drives: Aurora XE
User status: Offline
|
ok, so this is how i did it, its a bit simpler than the proper way, but allows you to use the fogs with only the sidelights on or with the headlights on also:
switch terminals/ wires:
1- brown - wire this to an earth point
2- 2x black/green - these wires go to operate the relay (and dash light if you have one, i didnt)
3- grey/green - 12v live from the sidelight circuit
4- 2x grey/green - 12v live from the sidelight circuit
5- black - to operate the relay (can be joined to a black/green wire)
i hope people can understand this ok.
-fuju, thats not a bad idea, i will take pics tomorrow and make a tutorial
ttfn
|
