RobHayes
Member
Registered: 6th Sep 03
Location: Lincolnshire
User status: Offline
|
how the fluck do i get it undone?
engine is out of car, just turns the crank etc when i turn it  tried to lock the assembly up by using a screwdriver through a hole and into the teeth, but then i succeeded in rocking the whole engine over rather than undoing the bolt
HELP!
|
Sly_SRi
Premium Member
Registered: 9th Apr 04
Location: Reading, UK Drives: Corsa C
User status: Offline
|
If you have the gearbox off then bolt a piece of metal onto one of the gearbox bolt holes and have it do it jams into the fly wheel tooth.
If the gearbox is still on then put a small piece of metal in one of the teeth of the flywheel and jam it in the starter motor.
Then get a BFO leverage bar and give it some 'who are ya'
Corsa C Z20Let
Black Sleeper Turbo Project
|
Sly_SRi
Premium Member
Registered: 9th Apr 04
Location: Reading, UK Drives: Corsa C
User status: Offline
|
You will also need the engine well secured, maybe wedge it against somthing and jam some planks in from either side.
Corsa C Z20Let
Black Sleeper Turbo Project
|
Cossie
Member
Registered: 17th May 02
User status: Offline
|
maybe it has some tread lock heat it a bit with hot gun !
|
RobHayes
Member
Registered: 6th Sep 03
Location: Lincolnshire
User status: Offline
|
well, tried that, couldnt find any suitable metal leave it for tomorrow now i reckon
|
ryan_fowler1985
Member
Registered: 27th Jul 05
Location: Trevethin, Torfaen
User status: Offline
|
i got the same problem with a c20xe im rebuilding shoot wen u relise aint it.
|
Dave A
USER UNDER INVESTIGATION - DO NOT TRADE
Registered: 10th Dec 03
Location: County Durham
User status: Offline
|
remove the gearbox (10 min job) and remove one of the clutch cover bolts. stick a small screwdriver or strong drillbit through the hole (try and get the hole to about 11 o clock position) and there is a space in the block which the bit will slot into and lock the flywheel in place.
|
