RKS
Member
Registered: 2nd Mar 04
Location: Gloucestershire UK
User status: Offline
|
My corsa (c14se) is idling at 2000rpm.
I assume the idle control valve has stuck open?
|
topshot_2k
Banned
Registered: 1st Dec 03
Location: Northampton Drives: Pug GTi-6
User status: Offline
|
air leak? ICV? TPS?
|
Corsa E-Tec
Member
Registered: 4th Feb 04
Location: Stevenage Drives: Leon Cupra
User status: Offline
|
if it's stuck open, removes it and clean it with carb cleaner.
also put a little through the inlet.
|
Miles_SXi
Member
Registered: 21st Aug 06
Location: Yate, Bristol
User status: Offline
|
Idling... is that stalling?
|
topshot_2k
Banned
Registered: 1st Dec 03
Location: Northampton Drives: Pug GTi-6
User status: Offline
|
no, idle is when the engine is running without the throttle being open etc
|
Miles_SXi
Member
Registered: 21st Aug 06
Location: Yate, Bristol
User status: Offline
|
What does that mean when driving tho?
|
mikeef
Banned
Registered: 20th Aug 06
Location: Kent
User status: Offline
|
Mine idles at 900-1000, That about normal?
|
Corsa E-Tec
Member
Registered: 4th Feb 04
Location: Stevenage Drives: Leon Cupra
User status: Offline
|
thats nmormal it's between about 800-1000 odd.
|
RKS
Member
Registered: 2nd Mar 04
Location: Gloucestershire UK
User status: Offline
|
Miles.. saying a car is idling is the same as saying it is ticking over...
the problem cured itself, it did it all the way home from work aswell as too work this morning, then i gathered the tools and a spare icv that i've had and it just stopped and starting running fine!!
its done this once before thats why i have a spare icv, so this time i changed it anyway, i've changed it before also as i kept getting an ecu fault for the icv. but as the problem had cured i dont know if it was deffinatly the icv this time, i know that its deffinatly not an airleak, allthough could be the tps i hadnt thought of this before, we'll see if the problem comes back (again)
|
c4rsa-sport
Member
Registered: 6th Apr 05
Location: halesowen - birmingham
User status: Offline
|
i also am having this problem i know i have a little air leak where my filter meets the pipe but mine rises to 2500rpm and stays there
|