jamied
Member
Registered: 27th Oct 03
Location: Marbella,Spain Drives: C63
User status: Offline
|
Hey ppl, right in middle of doing it, well im stuck at first thing to do
boss came today and my wheel is a momo one, anybody any quick tips, do i fasten to boss first or...?
arghhhhh
Jamie
[Edited on 20-02-2006 by 306CORSA]
|
Gregor
Member
Registered: 28th Nov 03
Location: Paisley, Renfrewshire
User status: Offline
|
Do you have a steering wheel pulling tool ?
If not dont attempt it
|
jamied
Member
Registered: 27th Oct 03
Location: Marbella,Spain Drives: C63
User status: Offline
|
no i dont, although my wheel was off last yr, so fort it might still be loose?
|
Dave A
USER UNDER INVESTIGATION - DO NOT TRADE
Registered: 10th Dec 03
Location: County Durham
User status: Offline
|
fit boss, then wheel.
|
Gregor
Member
Registered: 28th Nov 03
Location: Paisley, Renfrewshire
User status: Offline
|
If you managed to get it off by hand before you should be ok.
Put the boss on , tighten the bolt up screw the wheel on connect up the horn , job done . Beep beep
|
Dave A
USER UNDER INVESTIGATION - DO NOT TRADE
Registered: 10th Dec 03
Location: County Durham
User status: Offline
|
no need for a puller, just hold in the 3&9 o clock position and shake like fook. remember to leave the nut on the steering shaft a few turns tho, otherwise you will pull it of and smack yourself in the nose
|
Fear
Member
Registered: 20th Nov 02
Location: Down off the hill
User status: Offline
|
you can get the wheel off easily enough with a hammer and plastic cowling bits off, done it to 2 corsas now!
you need to attach the boss to the wheel first then onto the car!
|
Dave A
USER UNDER INVESTIGATION - DO NOT TRADE
Registered: 10th Dec 03
Location: County Durham
User status: Offline
|
wether you fit the boss to the wheel or to the car first depends on the wheel, some you can fit onto the boss first, some you cant.
|
Jonny P
Member
Registered: 11th Dec 04
Location: Merseyside Drives: Civic Type R EP3
User status: Offline
|
make sure the wheels are straight when fitting it too
|
jamied
Member
Registered: 27th Oct 03
Location: Marbella,Spain Drives: C63
User status: Offline
|
arghh one of the screws on rear wonr budge and now the t30 doesnt even fget a grip
anybody help?
|
jamied
Member
Registered: 27th Oct 03
Location: Marbella,Spain Drives: C63
User status: Offline
|
0
|
Dave A
USER UNDER INVESTIGATION - DO NOT TRADE
Registered: 10th Dec 03
Location: County Durham
User status: Offline
|
drill......
|
jamied
Member
Registered: 27th Oct 03
Location: Marbella,Spain Drives: C63
User status: Offline
|
so just drill the end of it? will this set airbag off bud/
|
Adam-D
Member
Registered: 11th May 02
Location: Cheshire
User status: Offline
|
discconect the batterey for a couple of hours and when drilling it,
stay the fuck away from the front of it
|
jamied
Member
Registered: 27th Oct 03
Location: Marbella,Spain Drives: C63
User status: Offline
|
right will av a go at it in bit.
lol
how likely is it, it will go off?
|
namkeaps
Member
Registered: 25th Jan 06
Location: manchester
User status: Offline
|
if you have d/c the battery not much of a chance cos it wont have power really
disclaimer: no guaranteed to be true lol
|
IntaCepta
Member
Registered: 25th Mar 02
Location: Mill Hill East, Greater London
User status: Offline
|
quote:
Originally posted by jozza
make sure the wheels are straight when fitting it too
speaking from experience?
|
