Laney
Member
Registered: 6th May 03
Location: Leeds
User status: Offline
|
The last 2 attempts of knicking my car was from bending the door open and pulling the pin.
I know i could just remove the pins completely, but I wanted to smooth it over and make it look good.
Anyone done it?
Thanking you 
|
flipmo
Member
Registered: 4th Nov 02
User status: Offline
|
would be piss easy to do, but would look crap with a hole in teh door card so you would be best recovering them thus getting rid of the hole where it used to be
|
Luke1.4
Member
Registered: 2nd Dec 02
Location: Blackpool
User status: Offline
|
i am just thinking of doing this so i took the door card off removed the door pin. On the door card where the pin goes through there is a plastic trim around the hole i was thinking of filling it with filler and colour coding just a cheaper option than the retrim
|
adelcorsa
Member
Registered: 21st Apr 03
Location: ipswich
User status: Offline
|
not filler try fiberglass
|
Mav 3000
Member
Registered: 16th Aug 01
Location: Leicestershire
User status: Offline
|
I think Kris TD has done this - removed the pins.
|
Kris TD
Member
Registered: 25th Mar 02
Location: Ware, Hertfordshire
User status: Offline
|
i took off the door card, cut the metal rod, fibreglassed the hole in the door card up and retrimmed the doors.
it cost me 3 quid for material too do all 4 door cards and a tenner on glue.
i totally removed 3 door pins and the drivers one i cut the top off so when locked it sits flush with the door card, filled the the top with filler and just brushed a bit of black paint on, very quick easy job.
|
Rob H
Member
Registered: 28th Oct 00
Location: Staffordshire Drives: Astra SRi
User status: Offline
|
quote:
Originally posted by Luke1.4
i am just thinking of doing this so i took the door card off removed the door pin. On the door card where the pin goes through there is a plastic trim around the hole i was thinking of filling it with filler and colour coding just a cheaper option than the retrim
Like he says do that, but i had an idea of putting alarm LED's in the blank, so it looks like it still serves a purpose 
|
