Generation
Member
Registered: 7th Jul 09
Location: Essex
User status: Offline
|
On my f20 it was just one bolt And bracket come
Out easily for speedo sensor to push in.
On my let I have this
Very hard to get at, and don't seem
To be any kid of gap around bottom, does it come out?
|
Danny W
Organiser: East Midlands
Premium Member
Registered: 14th Nov 05
Location: Northamptonshire
User status: Offline
|
From that picture to me it looks like the bracket isn't there? But yeah the speedo drive does pull out although I found mine easier to remove when the box was split as the diff and speedo ring arnt putting pressure on it.
Also make sure all the threads are clean and screw on the cable for the clocks before putting too much back into the engine bay .. It's a right pig to do otherwise especially if you've big hands like me lol
Smoke Grey 5 Door
EastMids Regional Events
|
monkeytwizzel
Member
Registered: 10th Aug 11
Location: Chard, Somerset
User status: Offline
|
Yes bolt and clamp is missing,probably some crap around the oring seal making it stick.
WD40 and be careful pulling it out because it may snap and that means gearbox apart in worse case.
|
tobyc20xe
Member
Registered: 28th Jun 12
Location: bradford
User status: Offline
|
Is the box painted? Looks like the bracket is there but held in with all the paint around it?
|
Generation
Member
Registered: 7th Jul 09
Location: Essex
User status: Offline
|
It is painted.
I
Stupidly painted it before removing it.
So you all think I should carefully pull
Plastic part out?
Or trying screwing onto the existing thread
Many thans
|
tobyc20xe
Member
Registered: 28th Jun 12
Location: bradford
User status: Offline
|
Remove all the paint and crap first,if the brackets not therei should just pull out bud.
|
