Eddx14xe
Member
Registered: 12th Jan 10
Location: Hertfordshire
User status: Offline
|
Thats just confused me as each channel needs a negative and positive
|
Eddx14xe
Member
Registered: 12th Jan 10
Location: Hertfordshire
User status: Offline
|
Actually that is right, bridge it how you said and it should work. The only thing that will happen is you will have no sound if its wrong
|
Woody
USER UNDER INVESTIGATION - DO NOT TRADE
Registered: 7th Aug 10
Location: Fareham
User status: Offline
|
i wired it all up but the power light does no show??? no sound  but the protection light is lit?
|
Jonny.N
Member
Registered: 10th Sep 08
Location: scotland
User status: Offline
|
put the + onto channel 1 + and the - onto channel 2 - and thats the 1 sub bridged between 2 channels, will sound alot better, but you might need a set of rca splitters for it to work properly (out the game a bit :lol and the protection light is on because something isnt right, could be a loose connection causing it to short out into protection,
|
Woody
USER UNDER INVESTIGATION - DO NOT TRADE
Registered: 7th Aug 10
Location: Fareham
User status: Offline
|
im just real confused i wired all the wires right the way i was told but could the fuse have gone hope not?
|
Woody
USER UNDER INVESTIGATION - DO NOT TRADE
Registered: 7th Aug 10
Location: Fareham
User status: Offline
|
the only thing thats diffrent is i could not find a screw in the boot so i taped the wire to the metal under the carpet?
|
Jonny.N
Member
Registered: 10th Sep 08
Location: scotland
User status: Offline
|
that would be your problem then bud, it needs to be secure onto a decent earthing point, otherwise it will keep shorting out, as it isnt getting a decent contact,
|
Woody
USER UNDER INVESTIGATION - DO NOT TRADE
Registered: 7th Aug 10
Location: Fareham
User status: Offline
|
well this may help.... i had a look and all seems fine when its on .... but lights on when the phono cables are taken out..... the light goes off
|
