jmdsouth
Member
Registered: 11th Feb 03
User status: Offline
|
Hi my temperature guage has stopped working on my clocks (corsa sport 1.4 16v) all the rest work fine i have checked and the connector and it is attached so i cleaned them up no change so im guessing its either the guage itself is knackered or the connector has fell out the back of the clocks so going to try that first, just wondering how difficult they are to take out i can see 3 screws is that all there is holding the surround to them on or will i have to remove the plastic around the steering wheel/ignition as well??   
|
Dean_W
Member
Registered: 13th Dec 05
Location: Downham Market, Norfolk
User status: Offline
|
The guage shouldn't go loopy.
Probably need a new temp sender for the engine.
|
jmdsouth
Member
Registered: 11th Feb 03
User status: Offline
|
in that case it must be the connector behind the clocks since i put the connector which is connected to a single blue wire near the cambelt on the left of the engine onto the rocker cover and front bar of the engine which should be a earth and send the needle of the clocks all the way to the right yes? and nothing happened
|
Dean_W
Member
Registered: 13th Dec 05
Location: Downham Market, Norfolk
User status: Offline
|
Correct.
|
