Dogeh
Member
Registered: 15th Jan 07
Location: kent
User status: Offline
|
Hi all, finally got round to doing the conversion. just a quick question. Is this the right way to wire up the fuel pump? :
the engine is going in a 1ltr 12v corsa btw. All other witing was easier than i thought it would be.
[Edited on 17-05-2007 by Dogeh]
|
Dogeh
Member
Registered: 15th Jan 07
Location: kent
User status: Offline
|
anyone?
|
Vaux Lad
Member
Registered: 15th Dec 04
Location: Stoke-on-Trent
User status: Offline
|
Yes mate.
The red/blue from the xe ecu plugs is the 12v feed to the pump.
|
Dave A
USER UNDER INVESTIGATION - DO NOT TRADE
Registered: 10th Dec 03
Location: County Durham
User status: Offline
|
on the 1.0 12v theres a second fuel pump relay behind the dash in the passenger side, just find the red/blue in the passenger footwell on the big multiplugs (left one) and cut it. get 2m of suitable cable join the red/blue from the ecu to the wire you have cut at the multiplug end with an inline fuse.
did one yesterday
|
Dogeh
Member
Registered: 15th Jan 07
Location: kent
User status: Offline
|
dont quite understand that dave. Theres 2 relays on the passanger side. One is fuel pump and one is the injector relay. The fuel pump relay is behind the injector relay. Using a sealey power probe tool i have managed to find which terminal on the relay holder goes to the fuel pump. I have removed the relay and have wired the red/blue wire from the XE single black plug to this terminal. According to the haynes manual this wire is already fused with 20A. Is this correct?
|
