vx.racing
Member
Registered: 17th Feb 06
Location: Tyrone, Northern Ireland
User status: Offline
|
My brake lights have stopped working. I have done a search on here already but have found nothing useful to me. I have already tried replacing the bulbs and replacing the bulb boards. This made no difference. The switch at the pedal is working fine. Has anyone got any idea's what might be the problem. Thanks.
|
vx.racing
Member
Registered: 17th Feb 06
Location: Tyrone, Northern Ireland
User status: Offline
|
up
|
vx.racing
Member
Registered: 17th Feb 06
Location: Tyrone, Northern Ireland
User status: Offline
|
No-one got any ideas?
|
dave..GSi
Member
Registered: 8th Jun 06
Location: Aberdeen
User status: Offline
|
cheak the fuses mate
|
vx.racing
Member
Registered: 17th Feb 06
Location: Tyrone, Northern Ireland
User status: Offline
|
Have checked all of the fuses and they are ok. Really can't figure out what the problem is!
|
Lisa
Member
Registered: 6th Apr 00
Location: Euxton, Lancashire
User status: Offline
|
brake light relay if there is one not 100% sure.
|
Warren G
Member
Registered: 14th May 06
Location: Kent
User status: Offline
|
check all the obvose, fuse, relay?, switch, if all okay you have to start checking feeds, make sure to have a feed to the rear light plug, and start working your way back, (the loom then runs from 0/s to n/s, were you lift the boot carpet to get to the spare wheel) check for any spit wires, possible tow bar been fitted before and have cut wires? the the loom runs down the n/s to the multipug below the glove box on the left behind the plactic panel, remove the plug and check for bend pins, corrasion etc. if you need any wiring diagrams u2u me. also check feed to fuse too. hope this helps
|
STEvieXE
Member
Registered: 21st Jan 03
Location: Ballymena N.I.
User status: Offline
|
check plug connetors. mine rusted up...
|
