|
Not logged in [Login - Register] |
You Are Not Registered Or Not Logged In |
Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » Brake Lights » Post Reply
|
STEvieXE |
posted on 6th Aug 06 at 12:02 |
check plug connetors. mine rusted up... | |
Warren G |
posted on 6th Aug 06 at 08:27 |
check all the obvose, fuse, relay?, switch, if all okay you have to start checking feeds, make sure to have a feed to the rear light plug, and start working your way back, (the loom then runs from 0/s to n/s, were you lift the boot carpet to get to the spare wheel) check for any spit wires, possible tow bar been fitted before and have cut wires? the the loom runs down the n/s to the multipug below the glove box on the left behind the plactic panel, remove the plug and check for bend pins, corrasion etc. if you need any wiring diagrams u2u me. also check feed to fuse too. hope this helps | |
Lisa |
posted on 5th Aug 06 at 15:54 |
brake light relay if there is one not 100% sure. | |
vx.racing |
posted on 5th Aug 06 at 15:47 |
Have checked all of the fuses and they are ok. Really can't figure out what the problem is! | |
dave..GSi |
posted on 5th Aug 06 at 07:38 |
cheak the fuses mate | |
vx.racing |
posted on 4th Aug 06 at 20:43 |
No-one got any ideas? | |
vx.racing |
posted on 3rd Aug 06 at 16:21 |
up | |
vx.racing |
posted on 3rd Aug 06 at 10:58 |
My brake lights have stopped working. I have done a search on here already but have found nothing useful to me. I have already tried replacing the bulbs and replacing the bulb boards. This made no difference. The switch at the pedal is working fine. Has anyone got any idea's what might be the problem. Thanks. |