ryan_fowler1985
Member
Registered: 27th Jul 05
Location: Trevethin, Torfaen
User status: Offline
|
i got a corsa x14xe engine and it has lost loadsof power really hard to pull off and flat through the revs it does about 90mph flat out. i have taken it too a garage but he didnt seem very interested and just said it could be valves. is he just trtying to rip me off. also it misses loads after hard acceleration. plese help ive changed loads of sensors and its starting to cost
cheers
|
Dave A
USER UNDER INVESTIGATION - DO NOT TRADE
Registered: 10th Dec 03
Location: County Durham
User status: Offline
|
wont be bent valves unless they have hit the pistons.
have you had it on a tech2 computer or a rolling road?
|
ryan_fowler1985
Member
Registered: 27th Jul 05
Location: Trevethin, Torfaen
User status: Offline
|
i havent had it put on a tech 2 compuetr will this show up a problem if the em light isnt on?
|
Dave A
USER UNDER INVESTIGATION - DO NOT TRADE
Registered: 10th Dec 03
Location: County Durham
User status: Offline
|
it will give you the values each sensor is sending to the ecu
|
ryan_fowler1985
Member
Registered: 27th Jul 05
Location: Trevethin, Torfaen
User status: Offline
|
how about if it has slipped a thooth on the timing would this cause these problems.its also drinking petrol
|
carnuts
Member
Registered: 28th Aug 05
Location: Hertfordshire
User status: Offline
|
could do cause the timing would be out
|
vaux-tech
Member
Registered: 28th May 06
Location: Preston, Lancs. Drives: Astra SRI turbo.
User status: Offline
|
bent valves? wudnt do that unless the belt snapped!
|
TOMAS
Member
Registered: 7th Aug 02
Location: Nottinghamshire
User status: Offline
|
Sounds like an ignition issue to me. How old is it and mileage? Check plugs and dispac.
|
PaulW
Member
Registered: 26th Jan 03
Location: Atherton, Greater Manchester
User status: Offline
|
leads/plugs would be my first port of call..
then dispac as mentiond...
|
carnuts
Member
Registered: 28th Aug 05
Location: Hertfordshire
User status: Offline
|
i meant that the timing being out can cause the sympytoms not bent the vavles lol if you had bent the valves you would know it would struggle to run at all
|