M6RKK
Member
Registered: 21st Jan 06
Location: Glasgow
User status: Offline
|
right basically the slag has been off the road for a few months and everything ran out tax mot insurance....blah blah so everythings done now and i am able to drive to go get the coilovers set up, how ever theres a major problem i put the Fk highsport coilovers on at factory setting and there 2 low... 2low that a quarter of the steering wheel is my full lock.
the top of the tyre is hitting the C spanner bits on the shox can anyone tell me the easiest way to adjust these to take them higher ? so that it clears them so its safe to drive?
Thanks
Mark
|
Siberia
Member
Registered: 9th Oct 03
Location: Leprechaun Land Drives : Zafira GSI
User status: Offline
|
whats the factory setting? did you transfer over the parts from you exsisting suspension? and did you make sure to throw away the packing nut that comes on the top of them...?
sounds like you tracking is all over the shop...
[Edited on 15-06-2006 by Siberia]
|
M6RKK
Member
Registered: 21st Jan 06
Location: Glasgow
User status: Offline
|
a dunno what the factory setting was and yeah a did transfer old bits tand throw away that nut... really baffeld on this one... i replaced the track rod ends aswell so the tracking needs done but its not bad... its the camber although av gave it as much negative camber as i can and it still scraps
making it higher ? how do i go about it ?
|
M6RKK
Member
Registered: 21st Jan 06
Location: Glasgow
User status: Offline
|
btt
|
Siberia
Member
Registered: 9th Oct 03
Location: Leprechaun Land Drives : Zafira GSI
User status: Offline
|
quote:
Originally posted by M6RKK
a dunno what the factory setting was and yeah a did transfer old bits tand throw away that nut... really baffeld on this one... i replaced the track rod ends aswell so the tracking needs done but its not bad... its the camber although av gave it as much negative camber as i can and it still scraps
making it higher ? how do i go about it ?
this is your problem... it must be within the factory settings (0 to -1 degree..)
to make it higher just use the C spanners to adjust the rings at the bottom of the springs
[Edited on 16-06-2006 by Siberia]
|
