DP.
Member
Registered: 21st Dec 03
Location: Stoke-on-Trent
User status: Offline
|
Hi,
Has anyone undertaken this procedure before? Im just wondering whether to do it myself or take it to a garage... and how much does a clutch from vaux cost actually?
Any tips / pointers?
Cheers
|
James R
Member
Registered: 4th Feb 03
Location: 205GTi16/306GTi16
User status: Offline
|
you'll probably have to take the gearbox off the engine.
Think it would be easier to undo the pressure plate with the gearbox still attached. Then unbolts and slide to one side, to remove the pressure plate and clutch then slide the new ones on and put the gearbox back together so it located the clutch, then bolt the pressure plate back on.
|
J100RSA
Member
Registered: 4th Mar 01
Location: Thornhill, West Yorkshire
User status: Offline
|
takes around 40 mins can do it through the inspection cover unless its a pre 92 valver with pot type flywheel then i can remove box and re-fit in around 2hours
|
DP.
Member
Registered: 21st Dec 03
Location: Stoke-on-Trent
User status: Offline
|
there should be a guide for this on the guides section of the forum 
the engine is from a 1991 calibra...
|
J100RSA
Member
Registered: 4th Mar 01
Location: Thornhill, West Yorkshire
User status: Offline
|
has it got a dizzy?
if so u can remove 5th gear casing remove shaft and use the compresion clips on the clutch
|
DP.
Member
Registered: 21st Dec 03
Location: Stoke-on-Trent
User status: Offline
|
yes it does have a dizzy...
any chance of some more detailed instructions doing it this way? as i have never changed a clutch before.
Cheers
|
