cheshiresport
Member
Registered: 5th Nov 06
Location: Northwich, Cheshire
User status: Offline
|
How does the rear bootlid handle come off the corsa, the one on the outside where the lock is. Ive lost the round vauxhall badge out of mine so im going to replace it with the newer style one.
Also how is the headlight switch panel removed, where are the screws that hold it in place? 
|
12vMatt
Member
Registered: 28th Oct 06
Location: Sunderland
User status: Offline
|
for the bootlid i believe there are some screws of clips or something behind the interior trim panel, just pull that off and you should be able to get at the lock no problem
|
Joe
Member
Registered: 20th Jun 04
Location: Hesketh Bank, Lancashire
User status: Offline
|
Yeah pull the clips out on the trim on the inside. Then there is 3 10mm nuts just undo them and take it off from the outside.
|
cheshiresport
Member
Registered: 5th Nov 06
Location: Northwich, Cheshire
User status: Offline
|
Cool cheers for that thought they may be 10mm nuts most vauxhall trim are lol, how do i get the headlight switch assembly out?
|
Joe
Member
Registered: 20th Jun 04
Location: Hesketh Bank, Lancashire
User status: Offline
|
Not too sure on that one, probably just prizes out but don't hold me to that.
|
cheshiresport
Member
Registered: 5th Nov 06
Location: Northwich, Cheshire
User status: Offline
|
Ok cheers pal, would have thought there would be a screw somewhere maybe behind the vent, think there is on the mk2 nova. Will have to have a look unless anyone else knows?
|
C4RL0
Member
Registered: 30th Sep 06
Location: Cumbria
User status: Offline
|
the headlight switch in the car?? Mine just pulled out with the help of a screwdriver
|
cheshiresport
Member
Registered: 5th Nov 06
Location: Northwich, Cheshire
User status: Offline
|
Yeah i dont want just the headlight switch itself i want the whole panel it sits in with the rear fog switch, dash light dimmer etc
|
Steve X16XE
Member
Registered: 31st Dec 06
Location: Barnsley, South Yorkshire
User status: Offline
|
Go to a scrappy and practice there. That's what i do...
|
cheshiresport
Member
Registered: 5th Nov 06
Location: Northwich, Cheshire
User status: Offline
|
Yeah thats where im going mate, just wanting to know what tools to take with me, will take my socket set and maybe torx bits and philips screwdrivers. Reckon that should cover it all
|
Steve X16XE
Member
Registered: 31st Dec 06
Location: Barnsley, South Yorkshire
User status: Offline
|
Thats all you need to strip a vaux. T20 torx bit and philips screwdrivers. LOL.
|
cheshiresport
Member
Registered: 5th Nov 06
Location: Northwich, Cheshire
User status: Offline
|
Sounds about right, love working on em so easy to strip
|
