supermike
Member
Registered: 6th Sep 05
Location: Aberdeen. Drives: 1.4 16v Corsa
User status: Offline
|
Aye aye. Was wondering if someone could help me out a bit.
Got a V reg 99 corsa 1.6 16v.
Engine management light is on..... Surprise surprise. Coming up with code P0340 camshaft sensor. I have replaced the cam sensor and cleared the codes. Still on and car still has its little misfire/hesitation at random points. Seems to get better as ye car warms up. I have checked the wiring and can't see anything obvious wrong. I was looking to find a way of testing voltages or resistance in both the loom and the sensor but can't find any information on this.
If anyone can help it would e greatly appreciated.
Mike
|
FlaFFy_91
Premium Member
Registered: 30th Sep 08
Location: Formby, Merseyside
User status: Offline
|
I know it sounds daft mate but have you replaced the crankshaft sensor by accident?
Sounds silly but could of easily be done
|
supermike
Member
Registered: 6th Sep 05
Location: Aberdeen. Drives: 1.4 16v Corsa
User status: Offline
|
Na na not a complete idiot but I'm sure there are people out there that have done exactly that.
|
FlaFFy_91
Premium Member
Registered: 30th Sep 08
Location: Formby, Merseyside
User status: Offline
|
i didnt mean it like that by the way mate, just ment yanno could be a easy mistake
has it come up with the same code again after you replaced the sensor or have you not re scanned it since?
|
supermike
Member
Registered: 6th Sep 05
Location: Aberdeen. Drives: 1.4 16v Corsa
User status: Offline
|
Yea I know what you mean man. Same codes and symptoms with both sensors
|
FlaFFy_91
Premium Member
Registered: 30th Sep 08
Location: Formby, Merseyside
User status: Offline
|
Could of been a dodgey replacement sensor. Pain in the arse but it does happen
Either that or a loom problem somewhere along the lines. Try traceing the wires back?
|
