Edges 58
Member
Registered: 30th Mar 10
Location: Nottingham
User status: Offline
|
Hi, just bought some electric mirrors from the scrap yard to replace my manual ones, have the 21 pins on the car to door loom plugs and the door looms for mirrors and windows, fitted them and neither side works  what fuse number is the one for leccy mirrors?? Could it be a faulty switch or is it likely that both mirror motors are nackered???
Thanks in advance
|
merlokquest
Member
Registered: 15th Dec 10
Location: north west - preston
User status: Offline
|
very much doubt its the mirrors get your self a mutli meter and check for power to the mirror when you operating the switch no power means no connection (or a bad one) follow your tracks back and u will usually fall accross what u have done wrong always good to have a good long look at the car the electric ones came off for your own reference when fitting to yours 
|
merlokquest
Member
Registered: 15th Dec 10
Location: north west - preston
User status: Offline
|
and as for your fuses just make sure there is a good fuse in every hole with electrical terminals in it
|
Edges 58
Member
Registered: 30th Mar 10
Location: Nottingham
User status: Offline
|
Thanks for that!! Any idea what size fuse to use??
|
merlokquest
Member
Registered: 15th Dec 10
Location: north west - preston
User status: Offline
|
mirrors will not be more than 10 amp pal in case u dont know and so its easier for you to locate them fuses are colour coded so
7.5 amp is brown
red 10 amp
15 blue
20 yellow
30 green
high power things such as
heater motors
cigerette lighters
are 30 amp
then charging systems are around 20
then your accessorys i.e indicators lights interior comforts are 10 hope this helps pal
|
Edges 58
Member
Registered: 30th Mar 10
Location: Nottingham
User status: Offline
|
Thanks!!!!
|
