Hodgy
Member
Registered: 29th Dec 09
Location: Felling, Tyne and Wear
User status: Offline
|
hi just put a x14xe in to my car used to be a 1.6 8v (x16szr) but orginally out of the factory it was a 1.2 16v
it wont start from a cold start the cold start is pluged in to the back of the inlet manifold
i have blanked the egr valve off but i have a white plug with a red and blue wire also a brown and yellow wire so thats 2 wires...... it apparantly plugs in to a solenoid on the passenger inner wing (i believe) will this cause that problem
also i had another thought is it becuase the fuel pump is from a 1.2 16v so it doesnt have enough pressure for the injectors to work properly ?????
thanks
|
Hodgy
Member
Registered: 29th Dec 09
Location: Felling, Tyne and Wear
User status: Offline
|
just put some petrol down the inlet pipe and it started for a few seconds i then decided to to check fuel pump and it is the wrong fuel pump
so will have to get a x14xe fuel pump
also
could it be the egr valve fooked ??
|
