phil_fcuk
Member
Registered: 25th Apr 08
User status: Offline
|
it started of as just a splutter in first gear, no it has come to only running on number 2 and 3. cylinders 1 and 4 have no spark getting to them. i have changed coil pack but with no change! i did paperclip test and it came up with coilpack 1 and 4 and MAP sensor. i have changed map sensor and coilpack but its still the same. i have now run out of ideas what it could be...
anyone??
[Edited on 08-05-2010 by phil_fcuk]
|
phil_fcuk
Member
Registered: 25th Apr 08
User status: Offline
|
ttt
|
reidy22
Member
Registered: 10th Aug 09
Location: scotland-ayr
User status: Offline
|
changed plugs and leads????
|
swill_omnibus
Member
Registered: 12th Dec 07
Location: : S. wales Drives: Dodge Caliber
User status: Offline
|
Try changing leads, plugs and disconnect battery for an hour to also reset ECU.
|
milky2010
Member
Registered: 31st Jan 10
Location: Luton
User status: Offline
|
quote:
Originally posted by reidy22
changed plugs and leads????
and the dizzy cap and rotary arm
|
DERV-POWER
Member
Registered: 13th Sep 09
Location: Greenfield, Flintshire
User status: Offline
|
probably ecu packed in by the sounds of it
|
Ryan_G1
Member
Registered: 29th Aug 05
Location: East Ayrshire
User status: Offline
|
quote:
Originally posted by milky2010
quote:
Originally posted by reidy22
changed plugs and leads????
and the dizzy cap and rotary arm
Its a coilpack engine 
|
phil_fcuk
Member
Registered: 25th Apr 08
User status: Offline
|
no i have changed coil pack, thats it. when i take number 1 and 4 plug leads off they have no spark what so ever and its exactly the same when i change the coil pack! and yes, i also disconnected the ecu for an hour and half to reset it and its still the same!  any more ideas??
|
Ryan_G1
Member
Registered: 29th Aug 05
Location: East Ayrshire
User status: Offline
|
done the plugs?
|
pteflint
Member
Registered: 22nd Dec 08
Location: trimdon station
User status: Offline
|
mine did something simerlar to that turned out to be ecu ,wish a new before a changed the head gasket plugs leads injectors fuel pump ect
|
jamesy1990
Member
Registered: 15th Dec 08
Location: fife
User status: Offline
|
mines done this turns out i had bent all 8 exhaust valves
|
phil_fcuk
Member
Registered: 25th Apr 08
User status: Offline
|
its not bent valves either. its sparking on 2 and 3 but not 1 and 4 checked all the above, apart from ecu. i wanna leave that till last cause thats the most costly
|
pteflint
Member
Registered: 22nd Dec 08
Location: trimdon station
User status: Offline
|
quote:
Originally posted by phil_fcuk
its not bent valves either. its sparking on 2 and 3 but not 1 and 4 checked all the above, apart from ecu. i wanna leave that till last cause thats the most costly
were you from ive a spare ecu chip and transponder ya could try if ya local
|
phil_fcuk
Member
Registered: 25th Apr 08
User status: Offline
|
im from wrexham, north wales mate. appreciate the offer, but im just about to leave to go get a new ecu kit from scrap yard. hopefully this will solve the problem. will update later...
|
phil_fcuk
Member
Registered: 25th Apr 08
User status: Offline
|
PROBLEM SOLVED........ after many hours of scratching my head i was looking at the engine loom, followed it back and it wasnt sat properly and the heat had melted through some wires cause some to break and some to touch each other. fitted a new engine loom and job is sorted!!! thanks for the help tho guys!  
|
