vxlgsi
Member
Registered: 28th Aug 03
User status: Offline
|
Had an idea to make use of the stock gsi bias valve..
Planning on doing track days i might need to adjust the rear bias depending on dry or wet conditions, so i thought id try and utilise the standard part.
The simple idea is to fit a braket allowing me to mount and attach a wire cable (like your lawnmower throttle cable) to the lever on the stock load bias......and run it inside the car up near the hand break to a lever.
quick diag..
what do ya recon... im deffo gonna give it a go
|
Dean_W
Member
Registered: 13th Dec 05
Location: Downham Market, Norfolk
User status: Offline
|
Fit a proper bias valve IMO.
|
cpcrampton
Member
Registered: 16th Feb 07
Location: Stirling
User status: Offline
|
perfect if u ask me. dont c why it wouldnt work. isnt it spring loaded though?
|
vxlgsi
Member
Registered: 28th Aug 03
User status: Offline
|
Yes it is spring loaded as standard but the spring is attached to the rear beam, and it wouldnt be used... there is quite abit of movement and i just tested it full up and full down and there is quite a big difference
|
cpcrampton
Member
Registered: 16th Feb 07
Location: Stirling
User status: Offline
|
use a solenoid or sevo to do it electronicly and have a adjuster in ur dash save a lawn mower style handle stiken out.lol
|
Dave A
USER UNDER INVESTIGATION - DO NOT TRADE
Registered: 10th Dec 03
Location: County Durham
User status: Offline
|
just slacken the rear off completely, no need for any braking on the back, makes it unstable when the car is stripped.
|
vxlgsi
Member
Registered: 28th Aug 03
User status: Offline
|
it wouldnt be on the dash, it would be near the handbrake, i was going to make a billet alloy lever for it.. From my experience brakes make a huge difference to stopping and keeping the car stable
|
Dean_W
Member
Registered: 13th Dec 05
Location: Downham Market, Norfolk
User status: Offline
|
On a car like a corsa, you don't need rear brakes. A large set of front ones are enough.
|
vxlgsi
Member
Registered: 28th Aug 03
User status: Offline
|
quote:
Originally posted by Dean_W
On a car like a corsa, you don't need rear brakes. A large set of front ones are enough.
|
