FozzyGSI
Member
Registered: 29th Jan 04
Location: E.Port
User status: Offline
|
Is it possible to remove/replace the exhaust manifold with the cylinder head still on in a C20xe corsa???
The reason im asking is because im trying to get the cylinder head back on with the manifold still in the engine bay and the space left to get the head back on is tighter than a gnats chuff ffs 
Ive tried dropping the anti roll bar and its still too tight
|
IvIarkgraham
Premium Member
Registered: 27th Mar 04
Location: Ellesmere Port, Cheshire
User status: Offline
|
use a hammer
|
FozzyGSI
Member
Registered: 29th Jan 04
Location: E.Port
User status: Offline
|
quote:
Originally posted by IvIarkgraham
use a hammer
Thanks  Very helpful
|
mitch2
Member
Registered: 14th Nov 05
User status: Offline
|
remove the fan and the radiator. This should give you adequate clearance.
|
GED2.0CORSA
Member
Registered: 28th Apr 04
Location: Mintlaw, Aberdeenshire
User status: Offline
|
yea as mitch says remove the rad and fan and u should have enough clearance past the exhaust bolts !!
|
FozzyGSI
Member
Registered: 29th Jan 04
Location: E.Port
User status: Offline
|
Yep had already removed the rad and exhaust studs. Had to drop the anti roll bar and disconnect the manifold from the rest of the system.....eventually managed to get the head on 
|
