|
|
|
Not logged in [Login - Register] |
 |
You Are Not Registered Or Not Logged In |
|  |
|
Corsa Sport » Message Board » General Chat » Remote central locking » Post Reply
|
| kazazza |
posted on 23rd Oct 09 at 14:25 |
Thanks, the fitting instructions Ive got look quite simple if I could just figure out which wires are the 'up, down and commonline'. Do you have any ideas what colour each one would be? Ive got some pics and some more info on the thread ive made about this if u want to check it out. Thanks for your help mate. | |
| bubble |
posted on 23rd Oct 09 at 14:13 |
quote: been a few years since done one, but if you already got cdl, its a case of fitting the control box, with positive and negative, and having wires from that box into door. you may be able to tap into the microswitch for the deadlock cam gear so that when you use remote fob it deadlocks straight away. | |
| kazazza |
posted on 23rd Oct 09 at 14:06 |
Ive already got central locking yeah. | |
| bubble |
posted on 23rd Oct 09 at 14:04 |
does the car have any locking now of the key, or do you have to manually lock the doors? | |
| kazazza |
posted on 23rd Oct 09 at 13:59 |
Im not too bothered about it not deadlocking tbh, just want rcl. Any ideas on how it should be wired up bubble? (see my post: http://www.corsasport.co.uk/board/viewthread.php?tid=524426) | |
| bubble |
posted on 23rd Oct 09 at 13:25 |
problem with adding rcl to a corsa b, is that it then wont deadlock your car, as the deadlock runs from a mechanical cam gear. if you dont have deadlocks now operated of the door key, then buy a cdl kit. | |
| kazazza |
posted on 23rd Oct 09 at 13:22 |
Ive just got that exact kit! Having some trouble finding the right wires to connect it to, here's my post if anyone has any ideas | |
| AlunJ |
posted on 21st Oct 09 at 16:18 |
gawd those rods are an absolute bastard to get right! Managed to get the passenger door one going fine after fighting with it, but the drivers door one isn't 100% | |
| daymoon |
posted on 21st Oct 09 at 16:14 |
quote: i can't remember which kit i bought as it was twoyears ago but it was one with remote locking. i think i still have two motors for CL somewhere :lol: i slightly messed up with bending the rods and then could tighten up the screws so CL wouldnt work with a key but was fine with a fob :lol: | |
| AlunJ |
posted on 21st Oct 09 at 16:10 |
well don't know if that one is any good, my microscan one was alright. Recently fitted a full hawk remote central locking kit to my brothers poverty spec b and that's pretty good, I'm sure they do a addon for key operated central locking as well don't they? | |
| daymoon |
posted on 21st Oct 09 at 15:53 |
Well i am not worried about wiring it in really. My dad has an electronics degree and works with wires all day long so that shouldn't bea problem :lol: | |
| AlunJ |
posted on 21st Oct 09 at 15:49 |
I fitted a kit to my old B which had key operated central locking so it would work by remote, and that was relatively easy, just wire up the remote central locking ecu to the existing central locking ecu in the drivers kick panel. | |
| daymoon |
 posted on 21st Oct 09 at 15:46 |
I want to add REMOTE central locking to my car. Atm it had central locking operated by key but i hate seraching for a key hole in darkness :lol: |