corsasport.co.uk
  Not logged in [Login - Register]  
You Are Not Registered Or Not Logged In  

Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » Corsa B Heater display bulbs... » Post Reply

Post Reply
Who Can Post? All users can post new topics and all users can reply.
Icon:
Formatting Mode:
Normal
Advanced
Help
Insert Bold text Insert Italicized text Insert Underlined text Insert Centered text Insert a Hyperlink Insert Email Hyperlink Insert an Image Insert Code Formatted text Insert Quoted text
Message:
HTML is Off
Smilies are On
BB Code is On
[img] Code is On
Post Options: Disable smileys?
Turn BBCode off?
Receive email notification of new replies?

Joff

 posted on 7th Nov 04 at 18:22

93-97
http://www.corsasport.co.uk/board/viewthread.php?tid=38827

97-00
http://www.corsasport.co.uk/board/viewthread.php?tid=102379


AdiSRI

 posted on 7th Nov 04 at 17:42

i need to do mine aswell, is there a guide or anything someone has done, i have NO lights at all on my centre dash now....


Joff

 posted on 7th Nov 04 at 17:33

I've lost so many screws and vent fins inside the heater system...


X 60RSA

 posted on 7th Nov 04 at 15:22

I got peed off trying to get it out, ended up punching the vents out of place :lol: Think i'm gona leave it hanging because i can see myself getting peed off with it, maybe a bad time to start it, its getting dark anyway! great excuse


broster

 posted on 7th Nov 04 at 15:16

is your car a face lifted one? if so, u need to remove the knobs, easy to do, just tug them off but the heated window one needs a screwdriver popping in a little hole in the bottom, ull see it, then tug it off, then make sure all screws are removed and pull the black bit off...ull see the bulbs then, good luck putting it back together again lol


X 60RSA

 posted on 7th Nov 04 at 15:14

My bulbs on my heater display have been out for ages so i have taken the necessary screws out and pulled the unit out 6 inches or so..........where the fcuk are the bulbs and how do i get in to take them out, there dont seem to be alot of room........

On the slider control unit (re/non circulating air) I've taken the black bit off the front, behind it there are 2 holes, bout 1 inch square with nothing in them.........am i missing the bulb holders on this bit?