NeilRocks
Member
Registered: 20th Oct 03
Location: Walsall West Mids
User status: Offline
|
HELP!
Just took out my centre plastic trim on my Corsa B to replace it. Took off MFD too.
Re-connected it - half the display is normal / other half dim.
Change bulbs - re-connect.
No display at all.
Take apart unit and find a brown mark on circuit board.
Blown resistor or summat simple?
Cheers.
|
Adam-D
Member
Registered: 11th May 02
Location: Cheshire
User status: Offline
|
couldbe a blown fuse change both bulbs for new ones
an check fuses
|
NeilRocks
Member
Registered: 20th Oct 03
Location: Walsall West Mids
User status: Offline
|
Both the bulbs are brand new.
Trip to the scrappy I think. How much do they charge for the things?
|
cobra148
Member
Registered: 27th Oct 01
Location: Here in front of my monitor.....
User status: Offline
|
I've got a spare one here, I can do it with a choice of display colour if your interested.
[Edited on 26-10-2003 by cobra148]
|
Screaming Vtec
Member
Registered: 29th Jul 03
User status: Offline
|
Same thing happend to me, turns out that the 'female' part of the plug had pulled loose, so wasnt making proper contact.. I resoldered the 10 legs that go through the PCB, and works proper again
|