weddy1988
Member
Registered: 17th Sep 07
Location: Fife
User status: Offline
|
basicly c20xe in a nova but the 4 wires that go to the coil i'm having problems with
its like the wires have been cut to fit a new plug
and fits as follows
black car (with wire wrapped round the wire) - black red (plug side)
black yellow--------------------------------------------black (plugside
twin wires black white-------------------------------green (plug side)
brown (car side)---------------------------------------brown (plugside)
main problem is is car wont start but if you wiggle the wire with the insolated wire round it it will start but fires on 3 cylinders and if you touch the wire with the wire thats wrapped round it it dies ?
i'm guessing the conector is off an diffrent loom
here on the left is the black wire with the insoluating that is getting me as what it connects to ethier doent have insulating or ive ripped it of by accident lol
|
sri boy
Member
Registered: 31st Aug 09
Location: glasgow springboig
User status: Offline
|
is it the plug that goes into the hall sensor bud
|
weddy1988
Member
Registered: 17th Sep 07
Location: Fife
User status: Offline
|
nah the plug for hall sensor is on the dizzy this is the one that plugs into the coil and 2 wires come off where it plugs in and go to the coil fella...easting away at me knowing what is wrong jsut not the correct wiring or how to fix it lol
|
andyc1234
Member
Registered: 7th Nov 06
Location: Lancashire
User status: Offline
|
haynes ?
|
grubz172
Member
Registered: 14th Jan 10
Location: Manchester Drives: Vehicles
User status: Offline
|
the black isolated wire is normally ignition live and runs into car? unless youve already connected that up
|
weddy1988
Member
Registered: 17th Sep 07
Location: Fife
User status: Offline
|
its all fine the car side its jsut going to the plug side...what does the isolation do ?...because when i join it to the plug i don tknow were to wrap / connect the isolation to becuase when it touches the wire that its isolating it cuts the car out
|
grubz172
Member
Registered: 14th Jan 10
Location: Manchester Drives: Vehicles
User status: Offline
|
yes but you have to run the black ignition live which is near coil when in calibras and cavs and wire it back into car or on nova you can connect it to the wiper motor or something,
|
weddy1988
Member
Registered: 17th Sep 07
Location: Fife
User status: Offline
|
so the black isolated wire thats coming off the coil wire that to the window wiper live?
|
grubz172
Member
Registered: 14th Jan 10
Location: Manchester Drives: Vehicles
User status: Offline
|
not too sure where exactly it goes on a nova either black wire going to fuse box or wiper motor wire ( should imagine its the live) ive only read about novas and onlydone corsas but at somepoint in the conversion the ign live needs to be run from near coil back towards car so if you havnt done that its probably something to do with that
|
grubz172
Member
Registered: 14th Jan 10
Location: Manchester Drives: Vehicles
User status: Offline
|
quick way to tell if it is that is live the wire to the + battery terminal and see if it starts
|
weddy1988
Member
Registered: 17th Sep 07
Location: Fife
User status: Offline
|
thats the thing the cars been converted for ages not bnd ithe plug on the xe loom has been cut off at some time and wired but they were shocingly wired so it stripped them all back now it wont work so i dont think its the car side of the wiring buddy
|
