|
Not logged in [Login - Register] |
You Are Not Registered Or Not Logged In |
Corsa Sport » Message Board » General Chat » silly problem found but how to fix » Post Reply
|
weddy1988 |
posted on 4th Jan 11 at 20:01 |
thats the thing the cars been converted for ages not bnd ithe plug on the xe loom has been cut off at some time and wired but they were shocingly wired so it stripped them all back now it wont work so i dont think its the car side of the wiring buddy | |
grubz172 |
posted on 4th Jan 11 at 19:33 |
quick way to tell if it is that is live the wire to the + battery terminal and see if it starts | |
grubz172 |
posted on 4th Jan 11 at 19:31 |
not too sure where exactly it goes on a nova either black wire going to fuse box or wiper motor wire ( should imagine its the live) ive only read about novas and onlydone corsas but at somepoint in the conversion the ign live needs to be run from near coil back towards car so if you havnt done that its probably something to do with that | |
weddy1988 |
posted on 4th Jan 11 at 19:23 |
so the black isolated wire thats coming off the coil wire that to the window wiper live? | |
grubz172 |
posted on 4th Jan 11 at 19:18 |
yes but you have to run the black ignition live which is near coil when in calibras and cavs and wire it back into car or on nova you can connect it to the wiper motor or something, | |
weddy1988 |
posted on 4th Jan 11 at 19:12 |
its all fine the car side its jsut going to the plug side...what does the isolation do ?...because when i join it to the plug i don tknow were to wrap / connect the isolation to becuase when it touches the wire that its isolating it cuts the car out | |
grubz172 |
posted on 4th Jan 11 at 19:09 |
the black isolated wire is normally ignition live and runs into car? unless youve already connected that up | |
andyc1234 |
posted on 4th Jan 11 at 17:46 |
haynes ? | |
weddy1988 |
posted on 4th Jan 11 at 12:32 |
nah the plug for hall sensor is on the dizzy this is the one that plugs into the coil and 2 wires come off where it plugs in and go to the coil fella...easting away at me knowing what is wrong jsut not the correct wiring or how to fix it lol | |
sri boy |
posted on 3rd Jan 11 at 20:07 |
is it the plug that goes into the hall sensor bud | |
weddy1988 |
posted on 3rd Jan 11 at 15:53 |
basicly c20xe in a nova but the 4 wires that go to the coil i'm having problems with |