ali_corsa
Member
Registered: 30th Jun 07
Location: Tamworth Drives: Focus st
User status: Offline
|
my cousin bent the inside of his locking bolt and it only has 1 locking bolt inside the packet, the locking nut doesnt sit in place with the bolt, is there anyway that he could get another bolt from mcgard? thanks
|
csweatherston
Member
Registered: 16th Jan 06
Location: Devon
User status: Offline
|
mcgaurd should supply you with a new one.
usually the locking wheelnuts/bolts have a code number ( or colour) with them as each one is unique....supposidly
|
Joe
Member
Registered: 20th Jun 04
Location: Hesketh Bank, Lancashire
User status: Offline
|
As said he should have got a code with them. Also for future reference don't buy Mcguard locking nuts, they are shit. Vauxhall ones are alot better.
|
ali_corsa
Member
Registered: 30th Jun 07
Location: Tamworth Drives: Focus st
User status: Offline
|
thanks i will tell him now to call them tomorow and ask them
|
Will_Sport
Member
Registered: 28th Jun 04
Location: Notts
User status: Offline
|
quote:
Originally posted by joe6886
As said he should have got a code with them. Also for future reference don't buy Mcguard locking nuts, they are shit. Vauxhall ones are alot better.
what he said^
are they spinning collar jobbies? i had some normal ones and lost they key, so got one of them reverse thread nuts removers, took a while, and nearly passed out it took so much effort (needed an impact driver really lmao).
and in future, put a small amount of copper grease on the first couple of threads of the bolt (make sure none goes on your wheel!), it'll prevent them ceasing up so much and reduce risk of bending when removing, and don't over tighten them either 
|
