sam-smith
Member
Registered: 8th Jan 07
Location: plymouth, UK
User status: Offline
|
fitted my componenets today. sound alot better. just need my sub set up properly.
one thing though. the windows wont go down. well they do but near the bottom the sort of fall......
soeakers are in the pods.
so im thinking wiring maybe? or maybe cus the crossover is stuck to the inside of the door next to the speaker.
cant be the speaker can it?
also how do i set up a sub
i hate leaving stuff half done. but im not taking the door to bits at 12 o clock
|
Richie
Member
Registered: 3rd Dec 02
Location: Newport, Wales
User status: Offline
|
The windows are probably hitting something. You will need to take the door cards out to check...
And when it comes to setting up a sub... which part do you mean 
Depends on what sub and amp you have too.
|
sam-smith
Member
Registered: 8th Jan 07
Location: plymouth, UK
User status: Offline
|
amp is alpine v poweer 750 watt. jbl 1000 watt sub
|
Richie
Member
Registered: 3rd Dec 02
Location: Newport, Wales
User status: Offline
|
Set the gain just over half way to start off with... set the LPF to 80hz and make sure you connect the sub to the bridged terminals on the amp and flick any bridge switches if the amp has any.
Wont be able to tell you for certain without the model number from the amp
|
Cupra Steve
Banned
Registered: 7th Nov 06
User status: Offline
|
As richie said start off with the gain fairly low, make sure the amp is on LPF (low pass filter) I think your amp may be a mono channel d class amp so you may not have anything to do with bridgeing or LPF as the amp is purely made for bass.
|
Richie
Member
Registered: 3rd Dec 02
Location: Newport, Wales
User status: Offline
|
With mono amps you still need to configure the LPF frequency and phase.
|
sam-smith
Member
Registered: 8th Jan 07
Location: plymouth, UK
User status: Offline
|
i had someone do it for me haha. cheer anyway! and it was a mono amp 
|
