twin exit exhausts - Corsa Sport - for Vauxhall and Opel Corsa B, Corsa C and Corsa D

Not logged in [Login - Register]

You Are Not Registered Or Not Logged In

Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » twin exit exhausts

New Topic

New Poll

Subscribe | Add to Favourites

You are not logged in and may not post or reply to messages. Please log in or create a new account or mail us about fixing an existing one - register@corsasport.co.uk

There are also many more features available when you are logged in such as private messages, buddy list, location services, post search and more.

RichR

Premium Member

Registered: 17th Oct 01
Location: Waterhouses, Staffordshire
User status: Offline

1st Aug 06 at 13:41

I've finally bought a second sebring back box to go on the other side of the car ( after 3 years)

Question is - how is it best to mount it - weld on hangers the same as the standard side; then have a split pipe from the end of the centre section to each box?

pictures would be helpful of peoples twin exits (from under the car) particularly where there are two boxes

p16vlv

Member

Registered: 15th Jun 02
Location: rossendale
User status: Offline

1st Aug 06 at 14:06

doubt it will fit, your original box sits in a space on the passenger side, there is not enough space on the other side to fit it.

RichR

Premium Member

Registered: 17th Oct 01
Location: Waterhouses, Staffordshire
User status: Offline

1st Aug 06 at 14:17

what about cutting off the tail pipe - and piping that to the end of the other box?

p16vlv

Member

Registered: 15th Jun 02
Location: rossendale
User status: Offline

1st Aug 06 at 14:39

you need a custom made twin exit system . if you dont do it properly you will get the exhaust gases coming out of one side only. and to be honest if you dont know what you are doing it will look crap. and could even be dangerous.

RichR

Premium Member

Registered: 17th Oct 01
Location: Waterhouses, Staffordshire
User status: Offline

1st Aug 06 at 23:13

it will be done properly I just want to check the correct way of doing it before someone does it - that way if they feed me bullshit -I'll know

Daniel_Corsa

Premium Member

Registered: 21st Apr 04
Location: Wigton, Cumbria
User status: Offline

2nd Aug 06 at 00:12

This is how mine works...

Not alot of room on the other side for a back box to be honest!

My 2 pipes are joined up by a pipe from the back box on the original position and then bent around the rear of the wheel well running along side the axle.

The its connected into the chassis in the cut outs in the floor holes are already there if you have a look under the car and its just got a hanger which bolts through these holes!

I can get pictures underneath the car if you want them as I need to sort my exhaust this week so will take some while I'm at it!