SetH
Member
Registered: 15th Jul 01
User status: Offline
|
been told to use carb cleaner? guessing you just spray it onto the MAF sensor and leave to dry? Its so think worried any kind of cloth will kill/snap it.
thoughts?
[Edited on 12-07-2006 by SetH]
|
Marc
Member
Registered: 11th Aug 02
Location: York
User status: Offline
|
Seth, its can't be done. Countless times on Scoobynet people have said to do this. It was suggested to me when I had my misfire. The MAF is a sealed unit, I tried running compressed air through it but couldn't.
Try blowing in to it you will see.
|
SetH
Member
Registered: 15th Jul 01
User status: Offline
|
so even when the induction cone off and looking into the MAF its sealed? thought there would be a thin piece of wire sitting in the tube 
|
Marc
Member
Registered: 11th Aug 02
Location: York
User status: Offline
|
Totally sealed when I had mine off.
|
broster
Premium Member
Registered: 6th Dec 02
Location: Drives: E39
User status: Offline
|
there will be a bit of wire you can see, cleaning it is not possible really, using carb cleaner can cause it to burn out
|
