scott b
Member
Registered: 23rd May 04
Location: Woolston, Drives: Combo C
User status: Offline
|
fingers crossed me combo b is going and is being replaced with a combo c.
does anyone know what the suspension set up is on them, and will corsa b front springs fit?
cheers
|
scott b
Member
Registered: 23rd May 04
Location: Woolston, Drives: Combo C
User status: Offline
|
anyone?
|
mikeySR
Member
Registered: 9th Mar 06
User status: Offline
|
Think the 'c' will be to heavy for springs off a 'b', rears might be the same, I cant remember
|
Adam-D
Member
Registered: 11th May 02
Location: Cheshire
User status: Offline
|
rears are leaf spring and im still unsure on how to lower the bastid
|
IvIarkgraham
Premium Member
Registered: 27th Mar 04
Location: Ellesmere Port, Cheshire
User status: Offline
|
if its leaf spring you need to get less bent leaf springs to lower it
|
flash22
Member
Registered: 13th Sep 05
User status: Offline
|
to lower most leaf spring's you can usualy get blocks to raise the rear hubs\axle off the spring what will lower the car/van
edit.... scrub that just looked at the vx epc the combo b uses leaf springs but the combo c uses the same setup as the corsa c coil spring and shock the spring will be uprate tho compared to the car for weight carrying
[Edited on 18-03-2006 by flash22]
|
flash22
Member
Registered: 13th Sep 05
User status: Offline
|
the combo c rear setup see pic
|
scott b
Member
Registered: 23rd May 04
Location: Woolston, Drives: Combo C
User status: Offline
|
cheers, time to hunt lowering springs down now,
as for lowering the rear of a combo b, if its the face lift one then there is blocks inbetween the axle and the spring that you can remove, to go even lower then youll need to get the springs straightend, theres a place in traford park manchester, that does it
|
Adam-D
Member
Registered: 11th May 02
Location: Cheshire
User status: Offline
|
cool
was driving thou l'pool today, first long run ive done, ive decided i want slitghly stiffer springs and gas shocks as its a little floaty on undulating surfaces at the front. the back is fine but could be a little lower
its a 2000 reg
|
