aceman
Member
Registered: 11th Jun 04
Location: scotland
User status: Offline
|
bought a cally turbo with a slipping clutch, owner said it was a new clutch that was in it but it was still slipping i put a new 3 peace kit in and it still slips just put a new fly wheel on still slipping guy's help, nout wrong with anything i can see so i now have a fly wheel away getting the lip that the pressure plate sitts on took down 2/3mm so the fly wheel and pressure plate sqush the clutch tighter anyone done this before or had any dealings like this or any ideas at all?
any help would be great guy's
|
Dave A
USER UNDER INVESTIGATION - DO NOT TRADE
Registered: 10th Dec 03
Location: County Durham
User status: Offline
|
migweb would probably be of more help mate.
|
big eck
Member
Registered: 20th Apr 03
Location: Tullibody. Drives - Audi B8 S4 & Fiesta Zetec-S
User status: Offline
|
Are the plates oil free???
|
aceman
Member
Registered: 11th Jun 04
Location: scotland
User status: Offline
|
yea
|
Siberia
Member
Registered: 9th Oct 03
Location: Leprechaun Land Drives : Zafira GSI
User status: Offline
|
if the clutch is still slipping then the rear crackshaft oil seal has to be fubar...
as mention try migweb also
|
ainsley_brader
Member
Registered: 24th Mar 02
Location: Tattershall, Lincolnshire
User status: Offline
|
is it cable or hydraulic clutch?
Assuming its a good quality clutch and theres no oil contamination id have thought itd have to be a fault on the leverage side of it.
If its cable is the clutch arm greased up and moving freely and is trhe cable properly adjusted.
|
