James@CCC
Member
Registered: 10th Nov 03
Location: Eaton Bray, Bedfordshire
User status: Offline
|
I just broke down driving home, it could have been worse as the aa got me home ok and quickly, but i now need some advise.
The pedals all the way back completely and i thoguht it was the clutch cable, but the guy told me its the clutch cable arm. does anyone know how much this will cost to replace and how hard it is, its a c20xe btw.
anyone else been towed, god it feels so fuckin awful
|
Joff
Member
Registered: 17th Oct 00
Location: Cambridgeshire
User status: Offline
|
Can you not say it was a C20XE - it makes it seem worse than it is.
|
James@CCC
Member
Registered: 10th Nov 03
Location: Eaton Bray, Bedfordshire
User status: Offline
|
it may soon happen to you too
|
myke
Member
Registered: 7th Feb 01
Location: High Wycombe, Buckinghamshire
User status: Offline
|
mine went whilst it was in the calibra.
think the arm was around £30ish.
i had mr clutch fit it for me with a new clutch at the same time.
the early type arms were a twisted bit of metal welded to a rod which tended to break at the weld.
newer ones are cast with a different method of fixing arm to pivot, which apparently lasts a lot longer.
if it's the early type then you could have it re-welded.
|
James@CCC
Member
Registered: 10th Nov 03
Location: Eaton Bray, Bedfordshire
User status: Offline
|
how do i find out which type it is? wot kinda price am i lookin at?
|
Joff
Member
Registered: 17th Oct 00
Location: Cambridgeshire
User status: Offline
|
Does it look like this? (if this is the arm on the top of the box)
![](http://www.corsasport.co.uk/carimages/1595/img_8534small.jpg)
[Edited on 30-12-2004 by Joff]
|
myke
Member
Registered: 7th Feb 01
Location: High Wycombe, Buckinghamshire
User status: Offline
|
arm was £30 or £40. something like that.
you'll tell because it will either be a flat piece of grey metal bent(twisted) through 90degrees with a fork at one end and the rod welded to the other; or a solid piece of cast metal painted black with a brass or zinc plated looking rod/pivot at the end.
|
James@CCC
Member
Registered: 10th Nov 03
Location: Eaton Bray, Bedfordshire
User status: Offline
|
dunno, its too dark and cold, i might try to have a looksy in the morning. i seriously doubt i could do it myself at all, so im probably goin to end up payin wotever im charged
|
Joff
Member
Registered: 17th Oct 00
Location: Cambridgeshire
User status: Offline
|
Out of all the stuff in the engine bay, you've probably got more space to work on the clutch arm than anything else.
|
myke
Member
Registered: 7th Feb 01
Location: High Wycombe, Buckinghamshire
User status: Offline
|
Joff's posted the early one with the twist.
this is the later one
![](http://www.corsasport.co.uk/carimages/2028/pict00024.jpg)
poor pic but the arm wasn't the subject.
|
James@CCC
Member
Registered: 10th Nov 03
Location: Eaton Bray, Bedfordshire
User status: Offline
|
ok cheers mate. but any ideas on how hard it is to change, if u can reach it can u change it without messing about with the clutch etc.
estimate to fix? 100? 200?
|
myke
Member
Registered: 7th Feb 01
Location: High Wycombe, Buckinghamshire
User status: Offline
|
i paid mr clutch £140ish to supply and fit a new clutch for me.
i gave them the new arm and they chucked that in for me for nowt.
can't be too difficult if someone is willing to do it for you for nothing. unless it has to come out to do the clutch anyway.
|
James@CCC
Member
Registered: 10th Nov 03
Location: Eaton Bray, Bedfordshire
User status: Offline
|
hmmmmmmmmmmmmm
|
James@CCC
Member
Registered: 10th Nov 03
Location: Eaton Bray, Bedfordshire
User status: Offline
|
ive just been out aqnd had a look, think its gotta be the old style type, doesnt seem to want to move at all tho, and id have thought it would move, eg when the cable pulled it. gonna try to book it in somewhere asap, pics up soon
|
myke
Member
Registered: 7th Feb 01
Location: High Wycombe, Buckinghamshire
User status: Offline
|
don't forget the amount of extra leverage you get from the pedal,
long bar from the pivot foot side, short bar from the pivot cable side, so the force is amplified substantially.
you may not be able to operate it by hand.
can you see that it's broken?
|
James@CCC
Member
Registered: 10th Nov 03
Location: Eaton Bray, Bedfordshire
User status: Offline
|
![](http://www.photodump.com/direct/james_corsa/brokenbit.jpg)
and close up
![](http://www.photodump.com/direct/james_corsa/closeup2.jpg)
so yea, u can definately see that its snapped and i presume thats the old style yea?
i just cant see how its attached. i phoned someone to fix it and until hes seen it he doesnt no how hard itll be to do, says he may need to take the engine out to do it![](/board/images/smile/confused.gif)
[Edited on 30-12-2004 by corser]
|
myke
Member
Registered: 7th Feb 01
Location: High Wycombe, Buckinghamshire
User status: Offline
|
yeah thats a clean snap, and old style.
when mine went to mr clutch they said the clutch could have been on its way out, which may have caused the arm to break.
dunno how true that was, but i was happy to have a new clutch fitted while it was there.
it's definately not an engine out job. it can probably all be done from the access panel under the gearbox.
you not got a haynes for cav/cally/astra?
someone on mig will guide you if you have an account on there.
|
James@CCC
Member
Registered: 10th Nov 03
Location: Eaton Bray, Bedfordshire
User status: Offline
|
how/wot do i do with the access panel under the gearbox lol, o dear i dont think im up to this at all. i dont have a haynes for any fo them, would it matter which i got or will any do cos its the same engine after all.
ill have an ask on mig, and i might as well have a play cos its not goin anywhere till tuesday anyway.
thanks alot for all your help myke
|
James@CCC
Member
Registered: 10th Nov 03
Location: Eaton Bray, Bedfordshire
User status: Offline
|
one more question;
i spoke to a mechanic at a garage earlier and he said the arm broke for a reason, and that if i weld it back on it will put extra strain on another component and thatll give way. is this right?
|
James_DT
Member
Registered: 9th Apr 04
Location: Cambridgeshire
User status: Offline
|
It could do, but the arm would be more likely to just break at the weld again further down the line.
|
myke
Member
Registered: 7th Feb 01
Location: High Wycombe, Buckinghamshire
User status: Offline
|
same as what i was told by mr clutch.
they claimed the clutch was starting to turn duff, and was getting stiffer to engage/disengage; and that this was what caused my arm to break.
for the price of supply and fit a new clutch, i didn't arghue and let them get on with it.
at theh same time a colleagues clutch arm snapped on his rover 200. he had his re-welded by a family friend, and hasn't let him down since. this was around 9months ago.
take a gamble, it may be ok. just don't cry about it if it does go wrong again in the near future.
|
James@CCC
Member
Registered: 10th Nov 03
Location: Eaton Bray, Bedfordshire
User status: Offline
|
thanks again myke
|
Adam-D
Member
Registered: 11th May 02
Location: Cheshire
User status: Offline
|
i was towed today
and i BROKE down more like blew up
|
James@CCC
Member
Registered: 10th Nov 03
Location: Eaton Bray, Bedfordshire
User status: Offline
|
lol, how horrible was it being towed! i thoght i was gonna crash into the bloody thing
|
Adam-D
Member
Registered: 11th May 02
Location: Cheshire
User status: Offline
|
rope or bar?
|