Ben ev
Member
Registered: 23rd Oct 05
Location: kingslynn / torquay
User status: Offline
|
fitted some racetec gauges recently but the bulb holders are abit dodgy so had to temperarely use the old ones but they dont fit properly. anyway heres the racetec ones . the live feed i assume goes into the brass bit under the grub screw but they dont seem to have any form of earth wire point. what should i do with them
heres the gauges
|
andyc1234
Member
Registered: 7th Nov 06
Location: Lancashire
User status: Offline
|
they should earth from the metal surround on the bulbs is there not an extra bit for an earth inside the gauges. could always just solder a bit of wire to the side
|
Ben ev
Member
Registered: 23rd Oct 05
Location: kingslynn / torquay
User status: Offline
|
nope nothing at all. the other ones have a bit for a small spade connector on the surround. seems abit weird since they were new from tweaks
|
andyc1234
Member
Registered: 7th Nov 06
Location: Lancashire
User status: Offline
|
if theres nothing on the bulb or the holder in the gauges then soldering a bit of wire is the only way.
|
andyc1234
Member
Registered: 7th Nov 06
Location: Lancashire
User status: Offline
|
did you get the heated seat thing sorted ?
|
Ben ev
Member
Registered: 23rd Oct 05
Location: kingslynn / torquay
User status: Offline
|
how stupid is that. should have a bit of metal and a sioldering iron in the kit then imo. gona go down raceparts uk and ask in there as they sell alot of racetec goodies
as for the seats still chasing that but will let you no.
|
