corsa_sport_gsi
Member
Registered: 9th Feb 07
Location: Essex
User status: Offline
|
ive lowerd the car 50mm at the back n truned the exhust clamp rite rnd so it don't knock but the backbox is knockin on were the rear beam goes onto the left rear hub if you know what i mean near the brake pipe is there ne fing i can do?
|
Planty02
Member
Registered: 5th Mar 05
Location: Burslem, Stoke-on-Trent
User status: Offline
|
cable tie something to the rear beam as a sound/shock absorber...piece of old bike tyre or something like that
|
DAZ1985
Member
Registered: 3rd Sep 06
Location: Scholar Green, Cheshire
User status: Offline
|
exhaust rubber cut in half and tie it to the rear beam using something which wont melt
|
corsa_sport_gsi
Member
Registered: 9th Feb 07
Location: Essex
User status: Offline
|
but it is konckin on the plate that the rear hub and beam meet at the side of the back box bcoz the box is ovral its wider and now knockin but ill c if the exhaust rubber will work
|
DAZ1985
Member
Registered: 3rd Sep 06
Location: Scholar Green, Cheshire
User status: Offline
|
have you tried a tighter exhaust mount on the opposite side to where its knocking?
Try a tie wrap around the rubber and hanger to pull the exhaust.
|
corsa_sport_gsi
Member
Registered: 9th Feb 07
Location: Essex
User status: Offline
|
gd idea will try and sort it 2mora thanks for the help fella
|
DAZ1985
Member
Registered: 3rd Sep 06
Location: Scholar Green, Cheshire
User status: Offline
|
no worries
|
45_CB
Member
Registered: 16th Apr 04
Location: South West Devon
User status: Offline
|
Mine used to be 100mm at the rear and had this problem
took me hours upon hours trying to position it correct so it wouldnt rattle!
|
gsirick
Member
Registered: 18th Feb 07
Location: mid-wales
User status: Offline
|
try turning the centre section a touch, my exhaust rattled like mad on the beam, n after lots of jacking up n down i finally got it to stop by turning the centre section then fit the backbox
|
