AustCorsaSport
Member
Registered: 18th Feb 06
Location: Pensilva, Cornwall
User status: Offline
|
i have my cableing its all setup and ready to go bar the blue remote cable. now i know i can connect it to that cable howver it is currently beinf used by my dab antenna! can i splice this cable coming out of the hu and use it for both the aerialand amplifier, its only a yes or no answer but cant find any posts with this stated as a problem, any help would be great. thanks
|
Rob_Corsa
Member
Registered: 4th Apr 02
Location: Derbyshire
User status: Offline
|
Shouldnt be a problem as an amp will only draw minimal current from the remote feed to turn itself on
|
Richie
Member
Registered: 3rd Dec 02
Location: Newport, Wales
User status: Offline
|
The remote lead usually has a total output of circa 1 amp.
Your antenna will probably draw about 300mA of that so you can tap off it and run it to your amp.
Each device will tell you the current draw on the appropriate wires.
|
AustCorsaSport
Member
Registered: 18th Feb 06
Location: Pensilva, Cornwall
User status: Offline
|
thanks for ur quick responses guys, much appreciated.
pete
|