Jules
Member
Registered: 26th Nov 04
Location: Ipswich, Suffolk Status: Happy
User status: Offline
|
Fitted new door speakers and tweeters to my GSi yesterday and today I've noticed that the one touch windows no longer work, the electric windows still work but you can no longer get them to automaticaly go up/down unless you hold your finger on the button.
I've looked that the drivers side window switch panel to see if any wires have come off or borken and they seem fine.
Any ideas?
I also fitted a Kenwood CD player and this has stopped the date being shown on the centre display ontop of the dash - is there a way to get this back up?
Cheers
Jules
|
ash_corsa
Member
Registered: 15th Apr 04
Location: Shrewsbury
User status: Offline
|
my one-touch windows also stopped working after i had an alarm fitted, and they didnt even take the door cards off when fitting the alarm, then about 2 weeks later they came back on by them selves!
|
richysport
Member
Registered: 15th Apr 05
Location: Flintshire, north wales
User status: Offline
|
my car done that before now when i was wirering up my amp and it was all ways giving me static shocks when i got out the car. think i dissconeted the battery cleaned the conecters and reconected it
|
Richie
Member
Registered: 3rd Dec 02
Location: Newport, Wales
User status: Offline
|
Ok to get the one touch windows back, press the down button on the windows and hold it on for more than 5 seconds after the window has fully wound down.
Then do the same when winding it back up,hold the button and once the window is fully up keep it pressed for more than 5 seconds.
That should get your windows back.
As far as the date display goes, you need to cut the grey/red wire in your corsa loom or the blue wire in your headunit loom.
|
Jules
Member
Registered: 26th Nov 04
Location: Ipswich, Suffolk Status: Happy
User status: Offline
|
Cheers guys, Richy - you mentioned the battery which jogged my memory - I changed the battery yesterday (for a nice Novavan diesel one  ) so I guess the one touch windows lost their 'memory', I done what Richie said and it's now sorted! 
And Richie re. the date display if I cut the grey/red wire on my loom it should work? The only blue wire I have on the headunit loom is a blue with white tracer and is the switched +12v for the amp so I won't be cutting that! I'll snip the grey/red as looking at the Haynes wiring diagrams it looks like it's just a signal wire between the TID and the ISO plug.
Cheers again.
|
ed
Member
Registered: 10th Sep 03
User status: Offline
|
It is indeed a signal wire between the ISO plug and TID and it does work....
|
ash_corsa
Member
Registered: 15th Apr 04
Location: Shrewsbury
User status: Offline
|
quote:
Originally posted by Richie
Ok to get the one touch windows back, press the down button on the windows and hold it on for more than 5 seconds after the window has fully wound down.
didnt know that! must have done that accidentaly to get em workin again
|
