Evil Ash
Member
Registered: 22nd Dec 02
User status: Offline
|
Wheres the best place to mount the ecu. Currently got it cable tied above the brake pedal.
|
Kieran McMutrie
Member
Registered: 1st May 02
Location: North West
User status: Offline
|
Mine is on passenger side. Underneath the shelve thing which is below the glove box..
[Edited on 30-03-2003 by Kieran McMutrie]
|
widget
Member
Registered: 17th Feb 03
User status: Offline
|
do what i did when i had 2.0 in,i modified the case the ecu fits in to make it fit the drivers well 
|
Evil Ash
Member
Registered: 22nd Dec 02
User status: Offline
|
Cheers, i think ill modify the case, less hassle than moving the loom.
|
Whap
Member
Registered: 28th Dec 02
Location: Chelmsford Car: 2.0lt 16v Corsa
User status: Offline
|
fits neatly in drivers well if you cut the mounting points off tight fit but looks better than it floating about!
|
stuyw
Member
Registered: 15th May 02
Location: North West Drives: Rev3 MR2 Turbo
User status: Offline
|
u need to cut the mounting points as said and also a bit of the black plug that goes into the ecu. Behind the drivers kick panel, where is a little screwhead sticking out, u need to file/cut that down and also remove some of the insulating foam. its a tight fit, but it goes in, plus it looks miles better than above the brake pedal. Id move as soon as, just incase the ecu gets trapped under the brake pedal 
|
Evil Ash
Member
Registered: 22nd Dec 02
User status: Offline
|
cheers, ill get chopping as soon as..
|
stuyw
Member
Registered: 15th May 02
Location: North West Drives: Rev3 MR2 Turbo
User status: Offline
|
instead of chopping all ov it - do it bit by bit so u dont fcuk it up by taking 2 much off
|
