|
Not logged in [Login - Register] |
You Are Not Registered Or Not Logged In |
Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » Attn 2.016v owners » Post Reply
|
stuyw |
posted on 31st Mar 03 at 16:19 |
instead of chopping all ov it - do it bit by bit so u dont fcuk it up by taking 2 much off :) | |
Evil Ash |
posted on 31st Mar 03 at 16:12 |
cheers, ill get chopping as soon as.. :) | |
stuyw |
posted on 31st Mar 03 at 15:15 |
u need to cut the mounting points as said and also a bit of the black plug that goes into the ecu. Behind the drivers kick panel, where is a little screwhead sticking out, u need to file/cut that down and also remove some of the insulating foam. its a tight fit, but it goes in, plus it looks miles better than above the brake pedal. Id move as soon as, just incase the ecu gets trapped under the brake pedal :! | |
Whap |
posted on 31st Mar 03 at 15:12 |
fits neatly in drivers well if you cut the mounting points off tight fit but looks better than it floating about! | |
Evil Ash |
posted on 30th Mar 03 at 21:05 |
Cheers, i think ill modify the case, less hassle than moving the loom. | |
widget |
posted on 30th Mar 03 at 18:36 |
do what i did when i had 2.0 in,i modified the case the ecu fits in to make it fit the drivers well :) | |
Kieran McMutrie |
posted on 30th Mar 03 at 17:16 |
Mine is on passenger side. Underneath the shelve thing which is below the glove box.. | |
Evil Ash |
posted on 30th Mar 03 at 16:23 |
Wheres the best place to mount the ecu. Currently got it cable tied above the brake pedal. |