charlessurr
Member
Registered: 15th May 05
Location: Sheffield
User status: Offline
|
SO i had a nosey around everything looked intact, i dropped the tank down and about a litre of fuel was sat on top of the tank, diconnected the fuel lines and filler pipe so the tank dropped down to find this...................
i presume its the problem, but i want to know if it simply screws off, or pops off and also what do i ask the parts guy for when im explaining what i need?
|
Dean_W
Member
Registered: 13th Dec 05
Location: Downham Market, Norfolk
User status: Offline
|
Looks like the pumps rusted to fuck.
|
charlessurr
Member
Registered: 15th May 05
Location: Sheffield
User status: Offline
|
Is that the fuel sender unit? In the pic i mean? Recon its a second hand jobby, or a new one from motor factors?
|
Dean_W
Member
Registered: 13th Dec 05
Location: Downham Market, Norfolk
User status: Offline
|
That's the intank pump.
|
charlessurr
Member
Registered: 15th May 05
Location: Sheffield
User status: Offline
|
The pump will be insdie will it not?
If i ask for a new pump i wont get the whole thing will i? or is it all attatched if you know what i mean?
|
Adam-D
Member
Registered: 11th May 02
Location: Cheshire
User status: Offline
|
yeah its just the pump, its part of it,
you can possibly seprate just the top disk im sure thou. lookin at it, any top disk will fit i-e a corsa one as that white plug is the same
|
Dean_W
Member
Registered: 13th Dec 05
Location: Downham Market, Norfolk
User status: Offline
|
Personally I think thats super fucked. But, take it to bits and investigate
|
Adam-D
Member
Registered: 11th May 02
Location: Cheshire
User status: Offline
|
if the pump still works, then i think the wireing can be disconected from the underside of the plate and the 2 pipes can and im 90% sure thats the same plate as a corsa one, so anyone with a old pump kicking about, the plate will fit it
|
charlessurr
Member
Registered: 15th May 05
Location: Sheffield
User status: Offline
|
Ive half sorted it, its the left handside pipe sticking out of the top that has a split in it, got my mum to put her fingers over both the pipes while i turned it over, she got covered in petrol, wasnt impressed, but ive found the problem at lest.
Going to get a replacement tomorrow off a calibra thats being broke.
|
