uppy
Member
Registered: 8th Nov 06
Location: Hampshire
User status: Offline
|
just got these wide arches anyone know how they go on... the come with no brackets or anything and no were to pop revite... looks like if you were to rivet they might brake 
|
BarnshaW
Member
Registered: 25th Oct 06
User status: Offline
|
help zone
|
ed
Member
Registered: 10th Sep 03
User status: Offline
|
Delete this thread, put a new one in Help Zone and I'll tell you the answer.
|
nova_gteuk
Member
Registered: 15th May 02
Location: South Wales Drives: The Bandwagon
User status: Offline
|
posted in wrong place,
But anyway you will need to get some tigerseal to fit them 
|
uppy
Member
Registered: 8th Nov 06
Location: Hampshire
User status: Offline
|
ed its in new zone can u help now?
|
ed
Member
Registered: 10th Sep 03
User status: Offline
|
You need some spring clamps and masking tape.
Offer the arches up to the car to make sure the fit ok, trim any material off thats in the way or not needed.
Key up the paint work a little and key up the gel coat on the arches on the surfaces which will be touching eachother and clean the area really well with some pannel wipe or similar.
Apply some PU Adhesive like Tiger Seal to the arch and to the pannel on the car - be generous, it wipes off. Then press the arch up against the panel, then hold the arch im place with some spring clamps. Ensure it's straight, then hold it in place with some masking tape too to make sure it doesn't sag or slip.
If you have any excess adhesive wipe off with some panel wipe on a soaking cloth - do it while it's wet you it will be a right mare to do later on!
Leave to dry, and you're away...
|
uppy
Member
Registered: 8th Nov 06
Location: Hampshire
User status: Offline
|
the only thing i question is its not a massize area to use the tiger seal on
|
