DJ Compassion
Member
Registered: 17th Jun 04
Location: shropshire
User status: Offline
|
ive got 3 sets of keys here and not one fits to big or to small?
weird, is there a speacil key for it?
gaz
|
Luke1.4
Member
Registered: 2nd Dec 02
Location: Blackpool
User status: Offline
|
I did mine with a allen key think it was 10mm
Was either 10mm or 8mm
[Edited on 03-05-2005 by Luke1.4]
|
sigibbons
Member
Registered: 10th Feb 04
User status: Offline
|
i bought a 7mm L shaped alen key especially for this.
|
Siberia
Member
Registered: 9th Oct 03
Location: Leprechaun Land Drives : Zafira GSI
User status: Offline
|
are your trying to take the caliper compltely off the car or are you trying to seperate the calper?
to take the caliper off you need a size 10 hex/alen bit
to sperate is a size 7
|
James R
Member
Registered: 4th Feb 03
Location: 205GTi16/306GTi16
User status: Offline
|
quote:
Originally posted by Siberia
are your trying to take the caliper compltely off the car or are you trying to seperate the calper?
to take the caliper off you need a size 10 hex/alen bitAnd a big fecking bar
to sperate is a size 7And a big fecking bar
That's a more accurate equipmanet list
|
ed
Member
Registered: 10th Sep 03
User status: Offline
|
Get an allen key set that fits onto your 1/2 ratchet, much better than one of those keys you buy from Halfords, you just cant undo the bolts with one without depositing the skin off of you knuckles onto a piece of metal somewhere while undoing them...
|
Siberia
Member
Registered: 9th Oct 03
Location: Leprechaun Land Drives : Zafira GSI
User status: Offline
|
quote:
Originally posted by j1400
quote:
Originally posted by Siberia
are your trying to take the caliper compltely off the car or are you trying to seperate the calper?
to take the caliper off you need a size 10 hex/alen bitAnd a big fecking bar
to sperate is a size 7And a big fecking bar
That's a more accurate equipmanet list
i bought a torque wrench with the intension of using it to tighen nuts but it just get used as a breaker bar
|
