Stu_22
Member
Registered: 25th Mar 02
Location: Luton
User status: Offline
|
Power Box Questions
How easy are they to fit?
If you can take off the top of you inlet manifold its dead easy. There is also a guide here http://www.corsasport.co.uk/board/viewthread.php?tid=362354
What engines can u fit them on?
X14XE, X16XE, C16XE(C16XE needs a X16XE lower inlet)
Any side affects from these? - in regards to reliability, or mpg??
No reliability issues as you are just shortening the route the air takes in to the engine. MPG might go up a bit as you make the most of more power
What colours do you make them in?
Satin Black is the standard colour but for an extra £5 I can change the colour so long as Halfords stock it
So the inlet comes with all the coloured pipes that are needed?
Yes
Does the same one fit both X14XE and X16XE or do they differ for both?
Yes
How much power would i roughly get out of low mileage 1600 sport?
Depends on other modifications as it compliment other mods such as exhaust manifold good exhaust but roughly 10bhp min
Would my standard x16xe inlet pipe fit?
No a new inlet pipe is supplied
Do I need any new cables etc?
Yes if you do it the easy way of extending the wires from there old position to the new one. Or you can find the wires where the come out of the bulk head and over the suspension turret. The ICV ones can be cut and shortened but the TPS will have to be tapped into to the wires(not cut) there as they are also EGR wires
What about all fixings and gaskets and an egr blanking plate are these included?
Everything included, EGR blanking plate only in C16XE kit
Would there Much point on putting this on my standard 1.4 Sport with no exhaust or engine mod of any kind?
If you want more power yes, plus it’s the beast engine mod to start with
Have you painted the inside also?
Yes
Would you sell just a box (inlet) alone i.e. no throttle body, gaskets, hoses etc?...Just the box and blanking plate?
Yes £110
So what price is it delivered with paypal fees?
£145.60 Stuarthoff@btinternet.com for paypal payments
[Edited on 15-02-2008 by Stu_22]
|
deex
Member
Registered: 9th Nov 07
Location: portsmouth
User status: Offline
|
do you have any idea on the power gains with these?
|
Stu_22
Member
Registered: 25th Mar 02
Location: Luton
User status: Offline
|
Not at the moment need to clean the tigra in the pic up and prepare it for a power run.
Initial test were good fun
|
deex
Member
Registered: 9th Nov 07
Location: portsmouth
User status: Offline
|
definately some gains then? if so is £130 inc p+p?
when will the first batch be ready?
|
Stu_22
Member
Registered: 25th Mar 02
Location: Luton
User status: Offline
|
As far as I'm concerned yes, lets face it not much different to a Mantzel box in that it get rid of a fair bit of restrictive pipework.
I have this 1 on the tigra pov sold
and one almost finished
£5 for P+P
I have paint options for white, back, flame red or DIY
|
davstar
Member
Registered: 5th Nov 07
Location: Cirencester
User status: Offline
|
I am one of said buyers. Keep you posted on cash this week Stu. Looking forward to fitting and trying it out.
|
stampy_54
Member
Registered: 9th Sep 07
Location: Flintshire
User status: Offline
|
are these easy enough to fit?
|
!!*CORSA SAM*!!
Member
Registered: 30th Jan 07
Location: hull
User status: Offline
|
what engines can u fit them on ?
|
Ste L
Member
Registered: 3rd Jul 06
Location: Manchester Drives: 106 16v Rallye
User status: Offline
|
quote: Originally posted by !!*CORSA SAM*!!
what engines can u fit them on ?
c16xe
x16xe
x14xe
|
Stu_22
Member
Registered: 25th Mar 02
Location: Luton
User status: Offline
|
Yes easy to fit just need to remove all the old crap inlet and fit new one.
Plus I'm here on the board a fair bit and have been for a while so I will help with any fitting questions
|
Ibrahim
Member
Registered: 5th Aug 07
Location: West Midlands
User status: Offline
|
I'm interested.....waiting to hear the gains first......
|
deex
Member
Registered: 9th Nov 07
Location: portsmouth
User status: Offline
|
yer me to^^
|
MJ
Member
Registered: 18th Sep 03
Location: Hampshire Drives: ITR DC2 + Skoda Felicia
User status: Offline
|
and me
|
danward
Member
Registered: 14th Nov 06
Location: Northants Drives: C Exclusiv
User status: Offline
|
Just wish it wasn't so ugly!!
|
Jas
Member
Registered: 13th Oct 04
Location: Mid Wales
User status: Offline
|
fuuuckin cheap! serious boys, if you think it looks ugly, it wouldn't take must to get it powdercoated of get a carbon frame made... worth the 130 all day long
|
Jas
Member
Registered: 13th Oct 04
Location: Mid Wales
User status: Offline
|
they depend on what other mods you have BTW lads... but you'd feel twice the amount of extra power added with this than you would with a 4-2-1 decat and cat back...
although if you ran with the above youd have a nippy little car
i reckon you can say it adds anything upto 10-12 if youve got an exhaust system, maybe 6 without..
it hasd a turbo like affect, with a powerband at 4k revs
|
Stu_22
Member
Registered: 25th Mar 02
Location: Luton
User status: Offline
|
This is the thing I bet most of you have spent more on you exhaust sytems for 3-4bhp.
More development means the cost will rise a bit
|
Ibrahim
Member
Registered: 5th Aug 07
Location: West Midlands
User status: Offline
|
Turbo like affect!? interesting....
|
stampy_54
Member
Registered: 9th Sep 07
Location: Flintshire
User status: Offline
|
will be interested when i have some spare cash
|
IvIarkgraham
Premium Member
Registered: 27th Mar 04
Location: Ellesmere Port, Cheshire
User status: Offline
|
how have you cut the holes to get the air through the lower manifold?
|
andyc1234
Member
Registered: 7th Nov 06
Location: Lancashire
User status: Offline
|
hopefully not as rough as the rest of it
|
Jas
Member
Registered: 13th Oct 04
Location: Mid Wales
User status: Offline
|
quote: Originally posted by Ibrahim
Turbo like affect!? interesting....
don't expect boost and spool up, nor dump valve noises. infact its prob more like vtec,
hits a certain revs and you get a sudden powerband and it starts pulling like hell
|
willhouse
Member
Registered: 11th Jul 06
Location: Sheffield
User status: Offline
|
remember on the c16xe that you will need the x16xe lower inlet manifold IIRC.
But otherwise, bloody bargain. Used to love my old Corsa Sport with a DBilas manifold, would have another any day of the week, makes the car so much better.
Good luck with the sales, free bump
|
Ibrahim
Member
Registered: 5th Aug 07
Location: West Midlands
User status: Offline
|
Any side affects from these? - in regards to reliability, or mpg??
|
Vaux Lad
Member
Registered: 15th Dec 04
Location: Stoke-on-Trent
User status: Offline
|
How many will you be making?
|