Got timing case changed over and bolted engine in tonight. Its just catching chassis leg and no more. Need to cut a bit out and weld in a section.
Next up is new flywheel pressure plate and clutch and get everything plumped in and a service and gaskets.

Got a couple arrivals in the post

Firstly my drivers side engine mount. Fingers crossed it works


And a bit of a bargin i couldnt refuse a walbro 255 intank pump



Having abit of bother getting timing case changed over. Rang heads of bolts and no power in lock up. Ive lend of a generator so thatl be next weekends work. During the week i plan to work any woth the case still on and no pulley and trial fit the engine with the new mount

Shes a 16v shell mate. I love the prefacelift sris. Nice front bumper and the red strips make them

quote:

---

Originally posted by taylorboosh
I fucking love sris

---

I fucking love sris

being out of a 9000 its proving to be to wide and the clutch assembly is for a 215mm where i need a 228mm flywheel and pressure plate to use my c20xe clutch plate and gearbox.

ive got timing case cover, alternator, water pump, crank pulley and tension from a saab 93 gathered up and im waiting on a drivers side engine mount arriving. Ill be back down tomorrow or monday and i aim to have timing chain cover etc fitted before mount arrives


[Edited on 30-08-2014 by jonnyken]

Hi folk thought id fire up a thread
Bought this with engine already fitted and no mot. Got it moted and had used it as a daily then i went and done my first 1/4 mile. Now im hookeded. First time down id just the seats out n shitty road tyres a 15.02

So spec at 2nd time out
corsa with a standard c20xe, avo coilovers, toyo t1r tyres on 15x6 steels instead of the standarx 14s and partly stripped (rear seats and brackets, door cards and sound deadening) weighed in at 880kgs
i ran a 14.4 and a 2.1 60ft

now i was doing the sensible approach and loosing weight and sorting traction before chasing more power for i do believe into the 13s was very achievable with bit more weight loss and slicks or drag radials but...

time slip


quick pic of the corsa (excuse the mirrors lol)


last pic with the redtop in it


ready to lift out


trail fit of the new plant


engine is to wide with theses pulleys and tensioner bracket sticking out