|
Not logged in [Login - Register] |
You Are Not Registered Or Not Logged In |
Corsa Sport » Message Board » Off Day » House Day » Electric advice » Post Reply
|
Steve |
posted on 14th May 16 at 19:01 |
Found a feed in the sockets ring so tapped I into that pics coming in my house thread. Fitted downlights too | |
Gary |
posted on 14th May 16 at 18:31 |
Not for one socket no. If its just for a dis box then it would be ok on the lighting circuit. Just make sure you chop into a mains cable and not a switch. Would be better on sockets though if you can spur off easy enough | |
Steve |
posted on 12th May 16 at 05:42 |
If I take one off an existing socket down the back of the walls do I have to put a fused spur in. Bearing in mind the appliance will have its own fused plug | |
Steve |
posted on 12th May 16 at 05:40 |
It's just for a TV amp distributor | |
Gary |
posted on 12th May 16 at 05:27 |
No. Doubtful you'll have any ringmain cables up there. It will all be lighting. By all means put a socket on the lighting circuit if you must but you'll only have 6amp to play with. | |
pow |
posted on 11th May 16 at 21:31 |
Yes. | |
Steve |
posted on 11th May 16 at 21:25 |
I wish to put a power socket in loft. Can I just find an existing power cable up there and cut into it putting the socket in line to continue the ring... |