corsasport.co.uk
 

Corsa Sport » Message Board » Off Day » House Day » Pond people » Post Reply

Post Reply
Who Can Post? All users can post new topics and all users can reply.
Icon:
Formatting Mode:
Normal
Advanced
Help

Insert Bold text Insert Italicized text Insert Underlined text Insert Centered text Insert a Hyperlink Insert Email Hyperlink Insert an Image Insert Code Formatted text Insert Quoted text
Message:
HTML is Off
Smilies are On
BB Code is On
[img] Code is On
Post Options: Disable smileys?
Turn BBCode off?
Receive email notification of new replies?

Cosmo

posted on 15th Sep 08 at 15:29

A lot fo things you have to take into account here really...size of pond, number of fish, type of fish, type of food, amount of filter media, flow rate of the filter, etc. etc.


drunkenfool

posted on 15th Sep 08 at 15:26

UV Clarifiers make a big difference cos it breaks down the cell wall of the algae, wich makes is clump together enough to be filtered out more easily. I cant remember off the top of my head how many watts you need for how much volume of water, but I can find out if you are interested.


AndyKent

posted on 13th Sep 08 at 08:22

We did the above with ours. Stayed clear for about a week, then the water went back to being just as green as it was before and all the stuff built up at the bottom again even with a larger pump/filter system running.

We've just left it, can't be arsed any more :lol:


paul.mitchell1984

posted on 13th Sep 08 at 08:13

its a family pond so not sure on equipment makes models etc.....basically we have removed all fish into storage, emptied the pong...garden wont need watering for some time..... then cleaned it all out approx 1- 2" in bottom, cleaned it all wiped it all down to get rid of as much greeen crap ass poss then filled it back in so that the liner didnt dry out too much

fingers crossed it wil help and i will suggest the above to him :) thanks


drunkenfool

posted on 12th Sep 08 at 16:23

Thats would be SO much work though for an existing pond, hence me suggesting a retrofitting bottom drain which is the next best thing.
http://allaboutkoi.co.uk/aerated-portable-bottom-dome-p-30071.html

:D


Stu_22

posted on 12th Sep 08 at 14:29

What I did on my 3rd an final design was to slope everything to to the end of the pond then put a 2inch pipe down to the lowest point and have a sequence pump in a nearby shed suck it all up havent ever cleaned the pond out


drunkenfool

posted on 12th Sep 08 at 10:05

pomd design is the most important, have a base with the pump in the lowest place so the crap drifts towards it then gets taken out byu the filters. Obviously its too late for that now, so gotta look at alternatives.
You could get an airated retrofit bottom drain, the current caused by the air bubbles sucks more crap into the pump, and then gets filtered out. You're looking at around £80 for one of them, plus an adequate air pump to run it.
Have you got a UV clarifier? What pump/filtration system you using? You could also look at getting a sieve but they are fucking expensive.
Failing all those preventative measures, you could just get a pond vac and suck the crap out the bottom of the pond and purge it to waste.


paul.mitchell1984

posted on 11th Sep 08 at 17:29

need a little advise

is ther anything that can stop all the sh&t settling int the bottom of pond that turbns into sluge silt stuff.

1st time weve cleaned out in approx 5yr maybe more, have the usual filters pumps etc going but always seems to settle n when it comes to cleaning it it smells worse than ...well i duno really

pond is approx 3ft deep, 6-8ft diameter

Ta