corsasport.co.uk
 

Corsa Sport » Message Board » Off Day » Snap Day » Motion pics... » Post Reply

Post Reply
Who Can Post? All users can post new topics and all users can reply.
Icon:
Formatting Mode:
Normal
Advanced
Help

Insert Bold text Insert Italicized text Insert Underlined text Insert Centered text Insert a Hyperlink Insert Email Hyperlink Insert an Image Insert Code Formatted text Insert Quoted text
Message:
HTML is Off
Smilies are On
BB Code is On
[img] Code is On
Post Options: Disable smileys?
Turn BBCode off?
Receive email notification of new replies?

Ian

posted on 1st Jun 05 at 00:47

quote:
Originally posted by vibrio
I try and keep the fstop at 16
Which is fine if you have a noiseless body like 20D. Anything older does not have this luxury.


Ian

posted on 1st Jun 05 at 00:46

quote:
Originally posted by Nismo
What about ISO 50 if you have the option?
Yeah no reason why not, should help noise levels yet further. Just see if you can stay within the 1/100th - 1/15th range and if so ISO is OK.


vibrio

posted on 31st May 05 at 09:14

I use ISO to bump up aperture. set to a shutter speed depending on speed and focal length (the faster you have to pan the faster the shutter speed you use unless your ace).

I try and keep the fstop at 16


Nismo

posted on 31st May 05 at 08:43

What about ISO 50 if you have the option?


Ian

posted on 30th May 05 at 23:53

Don't worry about ISO, just set at 100 and forget it.

Unless its very dark or you need lots of shutter speed you don't need to go higher.

At ISO 100, pick shutter priority mode and a shutter speed that will cater for your effect. If you want blurred wheels go for slower than 1/100th anywhere down to 1/15th ish depending how brave you are that you can track the car for 1/15th of a second and not blur the car as well as the background.

Longer focal lengths it becomes harder to pan anyway so if its critical speed up to 50th-80th for safety shots that will probably come out OK.

Experimentation will help but don't expect consistency, you might get sharp cars at 1/15th and blurred ones at 1/100th, just depends how steady your hand is on that shot, amount of wheel blur depends on car speed etc. etc., many factors.

This should work OK, the only time it will not is if there's no enough light even for slow shutter like that, and your aperture indicator will normally flash to tell you thats what you have but its not wide enough, ONLY THEN up the ISO and you'll get more sensitivity in low light. Higher ISO adds grain and should only be used if you anticipate or experience problems. Otherwise ISO 100!

[Edited on 31-05-2005 by Ian]


R Lee

posted on 30th May 05 at 21:03

"the red car and the blue car had a race...
the der der dumm dee dumm stuff his face..." :o


vibrio

posted on 30th May 05 at 15:38

read the guide at the top mofu


CorsAsh

posted on 30th May 05 at 15:16

I was panning like a prospector in the middle of a gold rush. :o


dave17

posted on 30th May 05 at 14:46

i think u have to pan with the camera


CorsAsh

posted on 30th May 05 at 14:42

What shutter speed (or general settings for that matter) would be recommended. Obviously ISO 400 would make the car appear to be standing still, but even using 100 or 200 I was only gettin a slight blur on wheels:



That was when they were at full pelt down the straight, were they just not goin fast enough or was I too far away etc? :look: