|
|
Dom
|
posted on 11th Nov 07 at 16:01 |
to be honest, there all pretty much like for like - some have the options of usb so you connect them straight to computer which can be useful.
The mybook and the buffalo support raid 1, which means you halve the storage but it creates a mirror copy, useful if one of the drives fail. The buffalo also offers other raid options like split array etc
As for the active directory, it just means that you can use it on a network where you have MS Server running and have a AD domain setup, which is unlikely in a home enviroment.
easiest thing would be to look for reviews, im sure there are plenty about for most well known nas boxes (ie: mybooks and baffalo nas's).
|
Tim
|
posted on 11th Nov 07 at 15:58 |
Most my team use Infrant ReadyNAS NV+ at home (I just have a separate server PC so that provides NAS for me).
If you have a gigabit network card then I'd recommend a NAS with RAID5 -- you'll get better performance than a single disk, plus you can lose one without losing any data.
Active Directory features means it will integrate with Windows domain authentication. Unless you're running AD there's really no need, but most NAS will have this anyway.
|
Doug
|
posted on 11th Nov 07 at 15:29 |
Anyone?
|
Doug
|
posted on 10th Nov 07 at 18:12 |
My mistake, The second link I provided should have been this one:
http://www.ebuyer.com/product/126886
I was wondering what all the active directory bits were? Any good resources on the web for learning about those bits?
|
drunkenfool
|
posted on 10th Nov 07 at 14:29 |
USB 2 is 400mbps, ethernet is 100mbps. In reality though you wouldnt notice _that_ much difference unless transferring a huge amount of data, you should get 10mB/s transferspeed over ethernet.
|
Doug
|
posted on 10th Nov 07 at 00:41 |
They are both NAS ??
yes its for personal use, I don't know if I have a gigabit port, I just have an ethernet port which I believe is 10/100?
In regards to the speed question I meant the scenario as the NAS in another room connected to the router and my computer wired to the router. Would the speeds still be good over normal ethernet cable?
|
Dan Lewis
|
posted on 9th Nov 07 at 23:06 |
personal use? you will notice massive difference between the 2, i would go NAS if you have the money
|
Rob_Quads
|
posted on 9th Nov 07 at 21:19 |
It has no USB so no you could not. If your laptop has a network port you could connect it using that, if its a Gigabit port it will be nice and fast.
|
Doug
|
posted on 9th Nov 07 at 19:40 |
Quick question....
I currently have a 500GB Western Digital extenal HDD running through USB 2.0 to my laptop.
I am looking at this one:
http://www.ebuyer.com/product/131442
Now I have a couple questions:
1- Can I plug that into my laptop via USB still?
2- Are the transfer speeds the same over ethernet and USB 2.0? (i.e. writing a file from my laptop to the drive, will it take the same amount of time over USB and Ethernet?)
Can you sum up the operational differences between what I have posted and something like this:
http://www.ebuyer.com/product/129813
What can I do with that second one that I cant do with the first one?
[Edited on 09-11-2007 by Doug]
|
