|
Not logged in [Login - Register] |
You Are Not Registered Or Not Logged In |
Corsa Sport » Message Board » General Chat » Pic Request - Corsa C20let RAD/Intercooler » Post Reply
|
Crana |
posted on 7th Mar 12 at 11:11 |
the turbo to cooler pipe was all over in this pic but you get the idea, I used a twin core gsi rad and had to be moved to the middle didn't want to cut my bumper so had to push the rad back a bit as well so its quite close to the turbo but not to bad, also have a 8'' slimline fan to fit | |
Rab_c20xe |
posted on 7th Mar 12 at 08:34 |
| |
Nic Barnes |
posted on 6th Mar 12 at 11:04 |
I got a tx autos port rad had brackets tig'd on to mount it. | |
Danny W |
posted on 6th Mar 12 at 10:58 |
This is how I did mine, corsa 1.6 rad secured with some brackets I made and a frontera intercooler in front of that, I'm also running standard pas pipes and let oil cooler. Tight squeeze but front bumper still fits on to neatly hide everything away. | |
fazza |
posted on 6th Mar 12 at 10:32 |
no mate unfortunately. | |
thegsi |
posted on 6th Mar 12 at 10:24 |
Do you have any mates who can chuck on to test? See if you read any pressure loss, leaks, etc? | |
fazza |
posted on 6th Mar 12 at 10:05 |
Boost pipe will be running down the side f the rad, ive already decided that. Just wasnt sure if I had to move the radiator over or not :lol: | |
gazza808 |
posted on 6th Mar 12 at 10:03 |
I find easiest way it to run boost pipes through inner arches. | |
fazza |
posted on 6th Mar 12 at 09:59 |
no, engines not in yet :lol: | |
thegsi |
posted on 6th Mar 12 at 09:58 |
Hmm I wouldn't of thought so but still I personally wouldn't trust it. Take one out and get a replacement from a local fixings company. Have you tried it out yet? | |
fazza |
posted on 6th Mar 12 at 09:49 |
thanks mate, whilst we sort of on subject. | |
thegsi |
posted on 6th Mar 12 at 09:17 |
You won't be using the existing brackets to mount it under the slam panel as there isn't enough room. Unfortunately I don't have pics but when I did my set up, I had to move the radiator right back to fit the FMIC and oil cooler above. The rad was sitting about 3" from the turbo! Just make some new brackets from joist hangers/ angle iron and fix into the slam panel :) | |
fazza |
posted on 6th Mar 12 at 09:00 |
Looking for pics of your intercooler/rad setup on a corsa c20let |